Skip to main content
SpringerLink
Log in

A study of piezoelectric harvesters for low-level vibrations in wireless sensor networks

  • Published:
International Journal of Precision Engineering and Manufacturing Aims and scope Submit manuscript

Abstract

In this paper, we aimed to study the feasibility of using a piezoelectric harvester as a potential energy source to power microsystems, such as MicroElectroMechanical Systems (MEMSs) in wireless sensor networks (WSNs). An off-the-shelf piezoelectric bimorph was first tested to determine the power output under various resonant frequencies in the range of 42 to 103 Hz. The results showed that the piezoelectric bimorph generated greater power output at lower frequencies and higher accelerations, achieving an output of 3.072 mW from a vibrational source of 53 Hz and 1 g acceleration. The same system was also examined in response to low-level vibration source found in common environments, such as areas of residence, transportation and machinery to investigate the viability of its use in an environment with inconsistent vibrational frequency. Finally, a discussion is provided regarding the use of piezoelectric harvesters for WSNs and potential approaches to increase power output.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

Abbreviations

MEMS:

MicroElectroMechanical Systems

VLSI:

Very Large-Scale Integration

WSN:

Wireless Sensor Networks

PZT:

Lead Zirconate Titanate

References

  1. Chilugodu, N., Yoon, Y. J., Chua, K. S., Datta, D., Baek, J. D., Park, T., and Park, W. T., “Simulation of Train Induced Forced Wind Draft for Generating Electrical Power From Vertical Axis Wind Turbine (VAWT),” Int. J. Precis. Eng. Manuf., Vol. 13, No. 7, pp. 1177–1181, 2012.

    Article  Google Scholar 

  2. Roundy, S., Wright, P. K., and Rabaey, J., “A study of low level vibrations as a power source for wireless sensor nodes,” Computer Communications, Vol. 26, No. 11, pp. 1131–1144, 2003.

    Article  Google Scholar 

  3. Yick, J., Mukherjee, B., and Ghosal, D., “Wireless sensor network survey,” Computer Networks, Vol. 52, No. 12, pp. 2292–2330, 2008.

    Article  Google Scholar 

  4. Chen, D., Nixon, M., Aneweer, T., Shepard, R., Burr, K., and Mok, A. K., “Wireless process control products from ISA 2004, International Workshop on Wireless and Industrial Automation, 2005.

    Google Scholar 

  5. Antoniou, M., Boon, M. C., Green, P. N., Green, P. R., and York, T. A., “Wireless sensor networks for industrial processes,” IEEE Sensors Applications Symposium, pp. 13–18, 2009.

    Google Scholar 

  6. Song, J., Mok, A. K., Chen, D., and Nixon, M., “Challenges of wireless control in process industry,” Workshop on Research Directions for Security and Networking in Critical Real-Time and Embedded Systems, 2006.

    Google Scholar 

  7. IEEE 1451, “A Standard Smart Transducer Interface,” Sensors Expo, 2001.

    Google Scholar 

  8. Correal, N. and Patwari, N., “Wireless Sensor Networks: Challenges and Opportunities,” MPRG/Virgina Tech Wireless Symposium on Wireless Personal Communication, 2001.

    Google Scholar 

  9. Nechibvute, A., Chawanda, A., and Luhanga, P., “Piezoelectric Energy Harvesting Devices: An Alternative Energy Source for Wireless Sensors,” Smart Materials Research, Vol. 2012.

    Google Scholar 

  10. Jiang, X., Polastre, J., and Culler, D., “Perpetual environmentally powered sensor networks,” Proc. of the 4th International Symposium on Information Processing in Sensor Networks, pp. 463–468, 2005.

    Google Scholar 

  11. Stephen, N. G., “On energy harvesting from ambient vibration, Journal of Sound and Vibration,” Vol. 293, No. 1–2, pp. 409–425, 2006.

    Google Scholar 

  12. Williams, C. B. and Yates R. B., “Analysis of a micro-electric generator for microsystems,” Senors and Actuators A: Physical, Vol. 52, No. 1–3, pp. 8–11, 1996.

    Article  Google Scholar 

  13. Gilbert, J. M. and Balouchi, F., “Comparison of Energy Harvesting Systems for Wireless Sensor Networks,” International Journal of Automation and Computing, Vol. 5, No. 4, pp. 334–347, 2008.

    Article  Google Scholar 

  14. Anton, S. R. and Sodano, H. A., “A review of power harvesting using piezoelectric materials (2003–2006),” Smart Materials and Structures, Vol. 16, No. 3, 2007.

    Google Scholar 

  15. Kong, N. A., Ha, D. S., Etrurk, A., and Inman, D. J., “Resistive Impedance Matching Circuit for Piezoelectric Energy Harvesting,” J. Intelligent Material Systems and Structures, Vol. 21, No. 13, pp. 1293–1302, 2010.

    Article  Google Scholar 

  16. Liang, J. and Liao, W. H., “Impedance Matching for Improving Piezoelectric Energy Harvesting Systems,” Proc. of Active and Passive Smart Structures and Intelligent Systems, 2010.

    Google Scholar 

  17. Wu, W. J., Chen, Y. Y., Lee, B. S., He, J. J., and Pen, Y. T., “Tunable Resonant Frequency Power Harvesting Devices,” Proc. of Smart Structures and Materials: Damping and Isolation, 2006.

    Google Scholar 

  18. Badel, A., Guyomar, D., Lefeuvre, E., and Richard, C., “Piezoelectric Energy Harvesting using a Synchronized Switch Technique,” J. Intelligent Material Systems and Structures, Vol. 17, No. 8–9, pp. 831–839, 2006.

    Article  Google Scholar 

  19. Kari, H. and Willing, A., “Wireless Sensor Networks,” Proc. of First European Workshop, 2004.

    Google Scholar 

  20. Liu, Y. M., Tian, G., Wang, Y., Lin, J. H., Zhang, Q. M., and Hofmann, H. F., “Active Piezoelectric Energy Harvesting: General Principle ad Experimental Demonstration,” Journal of Intelligent Material Systems and Structures, Vol. 20, No. 5, pp. 575–585, 2009.

    Google Scholar 

  21. Heidari, A., Yoon, Y. J., Son H. S., and Choi, H. J., “Simulation Based Design of Disk Resonator Based Biosensors under Fabrication Uncertainty,” Journal of Mechanical Design, Vol. 134, No. 4, Paper No. 041005, 2012.

    Google Scholar 

  22. Heidari, A., Yoon, Y. J., Lee, M. I., Khine, L., Park, M. K., and Tsai, J. M. L., “A novel checker-patterned AlN MEMS resonator as gravimetric sensor,” Sensor and Actuator A; Physical, Vol. 189, pp. 298–306, 2013.

    Article  Google Scholar 

  23. Heidari, A., Yoon, Y. J., Park, M. K., Park, W. T., and Tsai, J. M. L., “High Sensitive Dielectric Filled Lame Mode Mass Sensor,” Sensor and Actuator A: Physical, Vol. 188, pp. 82–88, 2012.

    Article  Google Scholar 

  24. Heidari, A., Yoon, Y. J., Park, W. T., and Tsai, J. M. L., “Developing High Sensitivity Biomass Sensor Using Lam Mode Square Resonator,” Advanced Materials Research, Vol. 254, pp. 46–49, 2011.

    Article  Google Scholar 

  25. Heidari, A., Yoon, Y. J., and Choi, H. J., “Analysis and design of a high performance and low cost bio-mass sensor based on the radial contour mode disk resonator,” Microelectronic Engineering, Vol. 88, No. 8, pp. 1730–1732, 2011.

    Article  Google Scholar 

  26. Abedinnasab, M. H., Yoon, Y. J., and Saeedi-Hosseiny, M. S., “High Performance Fuzzy-Pad Controllers: Introduction and Comparison to Fuzzy Controllers,” Nonlinear Dynamics, Vol. 71, No. 1–2, pp. 141–157, 2013.

    Article  MathSciNet  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639-798, Singapore

    Yong-Jin Yoon, King Ho Holden Li & Yu Qi Ng

  2. Department of Mechanical and Automotive Engineering, Seoul National University of Science and Technology, 172, Gongreung-2 dong, Nowon-gu, Seoul, South Korea, 139-743

    Woo-Tae Park

  3. School of Mechanical Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul, South Korea, 136-701

    Yongnam Song

Authors
  1. Yong-Jin Yoon
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Woo-Tae Park
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. King Ho Holden Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Yu Qi Ng
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Yongnam Song
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Yongnam Song.

Additional information

Equal Contribution as first author

Rights and permissions

Reprints and permissions

About this article

Cite this article

Yoon, YJ., Park, WT., Li, K.H.H. et al. A study of piezoelectric harvesters for low-level vibrations in wireless sensor networks. Int. J. Precis. Eng. Manuf. 14, 1257–1262 (2013). https://doi.org/10.1007/s12541-013-0171-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12541-013-0171-2

Keywords

Search

Navigation