Abstract
The thermomechanical response of the second-generation single-crystal nickel superalloy (SC180) was obtained for wide range of temperatures (25–1000°C). Uniaxial tension and stress relaxation experiments were performed to study the influence of [100] and [110] crystallographic orientation on stress anisotropy and creep responses. Experiments were conducted using micromechanical testing systems and strains were measured using two-dimensional digital image correlation technique. Results were reported on coefficient of thermal expansion, Young’s modulus (E), yield strength, work hardening (n), and activation energies (Q). The stress relaxation experiments were used to calculate activation energy in [100] and [110] crystallographic directions and found to be 300 kJ/mol and 350 kJ/mol, respectively.
Similar content being viewed by others
References
T.M. Pollock, S. Tin, and J. Propuls, Power 22, 361 (2006).
A. Wagner, B.A. Shollock, and M. McLean, Mater. Sci. Eng. A 374, 270 (2004).
X. Zhao, L. Liu, Z. Yu, W. Zhang, and H. Fu, Mater. Char. 61, 7 (2010).
V.N. Toloraya, E.N. Kablov, and I.L. Svetlov, Met. Sci. Heat Treat. 48, 352 (2006).
K. Fisher and W. Kurz, Fundamentals of Solidification, 4th rev. ed. (Zurich, Switzerland: Trans Tech Publications, 1986).
C.A. Gandin, M. Rappaz, D. West, and B.L. Adams, Metall. Mater. Trans. A 26, 1543 (1995).
D. Ma and U. Grafe, Mater. Sci. Eng. A 270, 339 (1999).
K. Kakehi, Metall. Mater. Trans. A 31, 421 (2000).
L.N. Wang, Y. Liu, J.J. Yu, Y. Xu, X.F. Sun, H.R. Guan, and Z.Q. Hu, Mater. Sci. Eng. A 505, 144 (2009).
R.P. Dalal, C.R. Thomas, and L.E. Dardi (Paper presented at the Proceedings of the 6th International Symposium on Superalloys, Champion, PA, 1984), p. 185.
R.J. Thompson (Ph.D. dissertation, Johns Hopkins University, 2008).
A.A. Hopgood and J.W. Martin, Mater. Sci. Eng. 82, 27 (1986).
G.R. Leverant and B.H. Kear, Metall. Mater. Trans. B 1, 491 (1970).
M. Feller-Kniepmeier and T. Kuttner, Acta Metall. 42, 3167 (1994).
T. Link and M. Feller-Kniepmeier, Metall. Trans. A 23, 99 (1992).
A. Staroselsky and B.N. Cassenti, Int. J. Solids Struct. 48, 2060 (2011).
S. Keshavarz and S. Ghosh, Acta Mater. 6, 6549 (2013).
A. Vattré, B. Devincre, and A. Roos, Acta Mater. 58, 1938 (2010).
H.C. Basoalto, J.W. Brooks, and I. Di Martino, Mater. Sci. Technol. 25, 221 (2009).
M. Huang, L. Zhao, and J. Tong, Int. J. Plast. 28, 141 (2012).
M.M. Shenoy (Ph.D. dissertation, Georgia Institute of Technology, 2006).
A. Pandey, V.K. Tolpygo, and K.J. Hemker, JOM 65, 542 (2013).
M.J. Donachie and S.J. Donachie, Superalloys, A Technical Guide, 2nd ed. (Materials Park, OH: ASM International, 2001).
D.T. Butler (Ph.D. dissertation, Johns Hopkins University, 2009).
A. Pandey, A. Shyam, Z. Liu, and R. Goettler, J. Power Source 273, 522 (2015).
J.S. Jones (Ph.D. dissertation, Johns Hopkins University, 2009).
A. Pandey, A. Shyam, T.R. Watkins, E. Lara-Curzio, R.J. Stafford, and K.J. Hemker, J. Am. Ceram. Soc. 97, 899 (2014).
L.R. Morris and W.C. Winegard, J. Cryst. Growth 5, 361 (1969).
S. Tian, X. Ding, Z. Guo, J. Xie, Y. Xue, and D. Shu, Mater. Sci. Eng. A 594, 7 (2014).
D.M. Knowles and Q.Z. Chen, Mater. Sci. Eng. A 356, 352 (2003).
V. Sass, U. Glatzel, and M. Feller-Kniepmeier, Acta Mater. 44, 1967 (1996).
D. Pan, M.W. Chen, P.K. Wright, and K.J. Hemker, Acta Mater. 51, 2205 (2003).
J. Svoboda and P. Lukas, Mater. Sci. Eng. A 234, 173 (1997).
W.W. Milligan and S.D. Antolovich, Metall. Trans. A 18, 851987 (1995).
J.R. Li, Z.G. Zhong, D.Z. Tang, S.Z. Liu, P. Wei, P.Y. Wei, Z.T. Wu, D. Huang, and M. Han, Superalloys 2000, eds. T.M. Pollock, R.D. Kissinger, P.R. Bowman, K.A. Green, M. McLean, S. Olsen, and J.J. Schirra (Warrendale, PA: TMS, 2000), pp. 777–783.
Acknowledgements
The authors are grateful to V.K. Tolpygo of Honeywell Corporation for providing funding and samples.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pandey, A., Hemker, K.J. Temperature Dependence of the Anisotropy and Creep in a Single-Crystal Nickel Superalloy. JOM 67, 1617–1623 (2015). https://doi.org/10.1007/s11837-015-1414-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-015-1414-8