Abstract
By using computational fluid dynamics (CFD) modeling and simulation, a predictive method was proposed to explore the erosion failure of reactor effluent air cooler (REAC) pipes with liner under multiphase flow. A theoretical model based on the erosion-corrosion effects of REAC on mixture turbulent flow was proposed for multiphase flow. Effects of various working conditions, liner shapes, and structures, as well as flow parameters on numerical simulations were investigated. Besides, the pipe’s erosion-corrosion rules under multiphase flow and the relationship between multiphase flow and erosion-corrosion under dangerous working conditions were studied. By CFD numerical simulations, the exact position where some typical pipes thinned and failed rapidly by erosion was found and the main factors causing erosion-corrosion failure were discussed. Finally, numerical results obtained by using the proposed method were compared with experimental results.
Similar content being viewed by others
References
Ou G F, Zhu Z C, Yang J, et al. Research on corrosion mechanism for the system of hydrocacker effluent air coolers. J Chin Soci Corrosion and Protechtion, 2005, 25(1): 61–64 (in Chinese)
Thorn R, Aohansen J G, Hammer E A. Recent developments in three-phase flow measurement. Meas Sci Tech, 1997, 8(7): 691–701
Villarreal J, Laverde D, Fuentes C. Carbon-steel corrosion in multiphase slug flow and CO2. Corros Sci, 2006, 48(9): 2363–2379
Chen L H, Fan J R, Cen K F. Numerical study on the flow features of U-beam inertial saparator. J Zhejiang Univ Sci, 2002, 3(4): 387–390
Bhongale S. Effect of pressure temperature and froude number on corrosion rates in horizontal multiphase slug flow. Dissertation for the Doctoral Degree, Houston: Rice University, 2000, 150–159
Zheng Donghong, Che Defu. Experimental study on hydrodynamic characteristics of upward gas-liquid slug flow. Int J Mult Flow, 2006, 32(10,11): 1191–1218
Zhang Jinsuo, Li Ning. Analysis on liquid metal corrosion-oxidation interactions. Corros Sci, 2007, 49(11): 4154–4184
Stack M M, Jana B D. Modelling particulate erosion-corrosion in aqueous slurries: some views on the construction of erosion-corrosion maps for a range of pure metals. Wear, 2004, 256(9,10): 986–1004
Zhu L, Li J, Wang YW, et al. Corrosion product of the underground thermal pipeline. J Zhejiang Univ Eng Sci, 2004, 38(2): 244–248
Mora-Mendoza J L, Chacon-Nava J G. Influence of turbulent flow on the localized corrosion process of mild steel with inhibited aqueous carbon dioxide systems. Corrosion, 2002, 58(7): 608–618
Wang H, Vedapuri D, Cai J Y. Mass transfer coefficient measurement in water/oil/gas multiphase flow. J Energy Res Tech, 2001, 123(2): 144–149
Naveen B, Ajay K R. Modeling, simulation, and multi-objective optimization of an industrial hydrocracking unit. Ind Eng Chem Res, 2006, 45(4): 1354–1372
Hara T, Asahi H, Suehiro Y. Effect of flow velocity on carbon dioxide corrosion behavior in oil and gas environments. Corrosion, 2000, 56(8): 860–866
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tang, P., Yang, J., Zheng, J. et al. Erosion-corrosion failure of REAC pipes under multiphase flow. Front. Energy Power Eng. China 3, 389–395 (2009). https://doi.org/10.1007/s11708-009-0045-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11708-009-0045-6