Abstract
This paper presents the development of an integrated sensor using two types of smart materials: electrorheological (ER) fluids and conducting polymers (CPs). The developed ER chip worked as an actuator, and it was driven by different voltages and control frequencies. When the four electrodes are controlled synchronously, the diaphragm acts as a vibrator whose frequency can be adjusted in accordance with the frequency of the electrical signals. The response signals of the CP sensor were recorded, and its properties were analyzed. Experimental results show that the amplitude decreases monotonically when the frequency increases, owing to the time delay in the pressure buildup in the ER chip. However, the displacement fluctuation of the diaphragm below 20 Hz can be detected clearly even if the value is very low. When the vibration frequency is larger than 20 Hz, the CP sensor can hardly detect the displacement fluctuation. Thus, the upper limit frequency that the CP sensor can detect is about 20 Hz. The practical applications of this microdevice are also discussed.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Laurell T, Petersson F, Nilsson A. Chip integrated strategies for acoustic separation and manipulation of cells and particles. Chemical Society Reviews, 2007, 36(3): 492–506
Kim S H, Choi J H, Lee S K, Kim S H, Yang S M, Lee Y H, Seassal C, Regrency P, Viktorovitch P. Optofluidic integration of a photonic crystal nanolaser. Optics Express, 2008, 16(9): 6515–6527
Liu L Y, Chen X Q, Niu X Z, Wen W J, Sheng P. Electrorheological fluid-actuated microfluidic pump. Applied Physics Letters, 2006, 89 (8): 083505-1–083505-3
Gong X Q, Peng S L, Wen W J, Sheng P, Li W H. Design and fabrication of magnetically functionalized core/shell microspheres for smart drug delivery. Advanced Functional Materials, 2009, 19: 292–297
Liu L Y, Niu X Z, Wen W J, Sheng P. Electrorheological fluidactuated flexible platform. Applied Physics Letters, 2006, 88(17): 173505-1–173505-3
Madden J D, Cush R A, Kanigan T S, Hunter I W. Fast contracting polypyrrole actuators. Synthetic Metals, 2000, 113(1–2): 185–192
Pytel R Z, Thomas E L, Hunter I W. In situ observation of dynamic elastic modulus in polypyrrole actuators. Polymer, 2008, 49(8): 2008–2013
Li M, Yuan J Y, Shi G Q. Electrochemical fabrication of nanoporous polypyrrole thin films. Thin Solid Films, 2008, 516(12): 3836–3840
Wu Y Z, Alici G, Madden J D W, Spinks G M, Wallace G G. Soft mechanical sensors through reverse actuation in polypyrrole. Advanced Functional Materials, 2007, 17(16): 3216–3222
Alici G, Spinks GM, Madden J D, Wu Y Z, Wallace G G. Response characterization of electroactive polymers as mechanical sensors. IEEE-ASME Transactions on Mechatronics, 2008, 13(2): 187–196
Author information
Authors and Affiliations
Corresponding author
Additional information
An erratum to this article can be found online at http://dx.doi.org/http://dx.doi.org/10.1007/s11465-009-0077-y.
An erratum to this article can be found at http://dx.doi.org/10.1007/s11465-009-0077-y
Rights and permissions
About this article
Cite this article
Zhang, X., Li, W., Wen, W. et al. Development of electrorheological chip and conducting polymer-based sensor. Front. Mech. Eng. China 4, 393–396 (2009). https://doi.org/10.1007/s11465-009-0043-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11465-009-0043-8