References
Lim CT, Shim VPW, Ng YH (2003) Finite-element modeling of the ballistic impact of fabric armor. Int J Impact Eng 28(1):13–31
Chiyo D, et al. (2010) Reactive structure and smart armor for army’s future ground vehicles. Army tank automotive research development and engineering center warren MI
Roylance D, Wilde A, Tocci G (1973) Ballistic impact of textile structures. Textile Res J 43(1):34–41
Shim VPW, Lim CT, Foo KJ (2001) Dynamic mechanical properties of fabric armour. Int J Impact Eng 25(1):1–15
Li Y, Ramesh KT, Chin ESC (2001) Dynamic characterization of layered and graded structures under impulsive loading. Int J Solids Struct 38(34):6045–6061
Citron J (2012) Biomechanical impact management using polyurea. Dissertation, University of California, Los Angeles
Youssef G (2010) Dynamic properties of polyurea. Dissertation, University of California, Los Angeles
Youssef G, Gupta V (2012) Resonance in polyurea-based multilayer structures subjected to laser-generated stress waves. J Exp Mech 52:1–10
Youssef G, Gupta V (2012) Dynamic response of polyurea subjected to nanosecond rise-time stress waves. J Mech Time-Depend Mat 16:1–12
Youssef G, Gupta V (2012) Dynamic tensile strength of polyurea. J Mater Res 27:494–499
Barsoum GS, Dudt PJ (2010) The fascinating behaviors of ordinary materials under dynamic conditions. Ammtiac Quarterly 4:11–14
Bishop PJ (2000) Impact performance characteristics of hockey helmets with liners of differing thickness. Safety in ice hockey: third volume, ASTM STP 1341, A.B.. Ashare, ED., American Society of Testing and Materials, West Conshohocken, PA
Tekalur SA, Shukla A, Shivakumar K (2008) Blast resistance of polyurea based layered composite materials. Compo Struct 84:271–281
Bahei-El-Din YA, Dvorak GJ, Fredricksen OJ (2006) A blasttolerant sandwich plate design with a polyurea interlayer. Int J Solids Struct 43:7644–7658
Amini MR, Isaacs J, Nemat-Nasser S (2010) Investigation of effect of polyurea on response of steel plates to impulsive loads in direct pressure-pulse experiments. Mech Mater 42:628–639
Grujicic M, Pandurangan B, He T, Cheeseman BA, Yen C-F, Randow CL (2010) Computational investigation of impact energy absorption capability of polyurea coatings via deformation induced glass transition. Mater Sci Eng, A 527:7741–7751
Bowen LG, Fletcher ER, Richmond DR (1968) Estimate of man’s tolerance to the direct effects of air blast. Defense Atomic Support Agency #2113, AD693105
Christou GA (2010) Development of a helmet liner for protection against blast induced trauma. Diss. Massachusetts Institute of Technology
ASTM Standard F1614 (2006) Standard test method for shock attenuating properties of materials systems for athletic footwear. West Conshohocken: ASTM International, doi:10.1520/F1614-99R06, www.astm.org
Sarva S, Deschanel S, Boyce M, Chen W (2007) Stress–strain behavior of a polyurea and a polyurethane from low to high strain rates. Polymer 48:2208–2213
Yi J, Boyce M, Lee G, Balizer E (2006) Large deformation rate-dependent stress–strain behavior of polyurea and polyurethanes. Polymer 47:319–329
Roland C, Twigg J, Vu Y, Mott P (2007) High strain rate mechanical behavior of polyurea. Polymer 48:574–578
ASTM Standard D 7136/D 7136M (2005) Standard test method for measuring the damage resistance of a fiber-reinforced polymer matrix composite to a drop-weight impact event. ASTM International, West Conshohocken
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gupta, V., Youssef, G. Orientation-Dependent Impact Behavior of Polymer/EVA Bilayer Specimens at Long Wavelengths. Exp Mech 54, 1133–1137 (2014). https://doi.org/10.1007/s11340-014-9854-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11340-014-9854-6