Abstract
Fibrous blends of polyethylene terephthalate (PET) and polylactic acid (PLA) were fabricated by electrospinning (ES) from a common solvent, at concentrations of PET/PLA = 100/0, 70/30, 50/50, 30/70, and 0/100. Oriented fiber mats were studied either as-spun, or after a cold-crystallization treatment. Scanning electron microscopy of as-spun amorphous fibers showed that addition of PLA into the ES solution prevents occurrence of beads. In some compositions, two glass transitions were observed by temperature-modulated differential scanning calorimetry indicating that the two components in the ES fibers were phase separated. Thermogravimetric analysis was used to study thermal degradation at high temperatures. PLA degrades at a temperature about 100 °C lower than that of PET, and holding or cycling the blends to high temperature can result in the degradation of PLA. Degree of crystallinity was determined using DSC for as-spun and cold-crystallized ES blend fibers. The degree of crystallinity of each blend component is reduced by the presence of the other blend component, and the overall crystallinity of the blend fibers is less than that of the homopolymer fibers. Wide-angle X-ray scattering results show that oriented crystals were formed in the blended electrospun fibers collected on a rotating collector. The cold-crystallization process leads to both PET and PLA crystallizations. Oriented crystallites form even when the fiber is crystallized with its ends free to shrink.
Similar content being viewed by others
References
Bjorksten J, Tovey H, Harker B, Henning J. Polyesters and Their Applications. London: Chapman and Hall; 1956.
VanderPlaats GN. Numerical optimization techniques for engineering design. Colorado Springs: VanderPlaats Research & Development Inc.; 1999.
Safa HL, Bourelle F. Studies on polyester packaging: effect of basic washing on multiuse pet and pen bottles. Packag Technol Sci. 1999;12:67–74.
Parikh K, Cattanach K, Rao R, Suh D, Wu A, Manohar SK. Flexible vapour sensors using single walled carbon nanotubes. Sens Actuators. 2006;113:55–63.
Farrington DW, Davies JL, Blackburn RS. Polylactic Acid Fibers. Cambridge: Woodhead Publishing; 2005.
Sodergard A, Stolt M. Industrial production of high molecular weight polylactic acid. In: Auras R, Lim L, Selke S, Tsuji H, editors. Polylactic acid: synthesis, structures, properties, processing and applications. Hoboken, New Jersey: Wiley; 2010. p. 27–37.
Henton D, Gruber P, Lunt J, Randall J. Natural Fibers, Biopolymers and Biocomposites. Boca Raton: CRC Press; 2005.
Blanco I, Siracusa V. Kinetic study of the thermal and thermo-oxidative degradations of polylactide-modified films for food packaging. J Therm Anal Calorim. 2013;112(3):1171–7.
Colomines G, Ducruet V, Courgneau C, Guinault A, Domenek S. Barrier properties of polylactic acid and its morphological changes induced by aroma compound sorption. Polym Int. 2010;59:818–26.
Chapple S, Anandjiwala R, Sinha Ray S. Mechanical, thermal, and fire properties of polylactide/starch blend/clay composites. J Therm Anal Calorim. 2013;113(2):703–12.
Chow WS, Lok SK. Thermal properties of poly(lactic acid)/organo-montmorillonite nanocomposites. J Therm Anal Calorim. 2009;95(2):627–32.
Bilzard KG, Donald G. Baird. The morphology and rheology of polymer blends containing a liquid crystalline copolyester. Polym Eng Sci. 1987;27:653–62.
Murff SR, Barlow JW, Paul DR. Thermal and mechanical behavior of polycarbonate-poly(ethylene terephthalate) blends. J Appl Polym Sci. 1984;29:3231–40.
Wang H, Sun X, Seib P. Mechanical properties of polylactic acid and wheat starch blends with methylenediphenyl diisocyanate. J Appl Polym Sci. 2002;84:1257–62.
Zhang L, Xiong C, Deng X. Miscibility, crystallization and morphology of poly(beta-hydroxybutyrate)/poly(d, l-lactide) blends. Polymer. 1996;37:235–41.
Chen H, Pyda M, Cebe P. Non-isothermal crystallization of polyethylene terephthalate and polylactic acid blends. Thermochim Acta. 2009;492:61–6.
Wang F, Meng X, Xu X, Wen B, Qian Z, Gao X, Ding Y, Zhang S, Yang M. Inhibited transesterification of PET/PBT blends filled with silica nanoparticles during melt processing. Polym Degrad Stab. 2008;93:1397–404.
Coltelli MB, Toncelli C, Ciardelli F, Bronco S. Compatible blends of biorelated polyesters through catalytic transesterification in the melt. Polym Degrad Stab. 2011;96:982–90.
Ma Q, Pyda M, Mao B, Cebe P. Relationship between the rigid amorphous phase and mesophase in electrospun fibers. Polymer. 2013;54:2544–54.
Pan P, Inoue P. Polymorphism and isomorphism in biodegradable polyesters. Prog Polym Sci. 2009;34:605–40.
Zhang J, Duan Y, Sato H, Tsuji H, Noda I, Yan S, Ozaki Y. Crystal modifications and thermal behavior of poly(l-lactic acid) revealed by infrared spectroscopy. Macromolecules. 2005;38:8012–21.
Pan P, Zhu B, Kai W, Dong T, Inoue Y. Effect of crystallization temperature on crystal modifications and crystallization kinetics of poly(l-lactide). J Appl Polym Sci. 2008;107:54–62.
Acknowledgements
The authors thank the National Science Foundation for support through the Polymers Programs of the Division of Materials Research, DMR1206010, and the MRI Program under DMR-0520655 which provided thermal analysis instrumentation. A portion of this research formed the basis for the senior honors thesis of KL. The X-ray scattering analysis was performed at the Brookhaven National Synchrotron Light Source, beam line X27C, supported by the Department of Energy.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, K., Mao, B. & Cebe, P. Electrospun fibers of poly(ethylene terephthalate) blended with poly(lactic acid). J Therm Anal Calorim 116, 1351–1359 (2014). https://doi.org/10.1007/s10973-013-3583-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-013-3583-4