Abstract
In this study, we report a simple method which via modified-colloid silica blending with polybutadiene-base polyurethane to form a hydrophobic composite material. The hydrophobic film is characterized by optical microscopy, scanning electron microscopy (SEM), and water contact angle. Desired surface roughness was obtained by hydrophobic silica tuning the microstructures that contact angle approach 150.1o when contain ODTMS/colloid silica =90/10. With the increase of the blended ratio of modified silica with the PBU, we also could obtain the rough surface, and increased its hydrophobicity.
Similar content being viewed by others
References
Barthlott W, Neinhuis C (1997) Planta 202:1–8
Yang S, Wang L, Wang CF, Chen L, Chen S (2010) Langmuir 26:18454–18458
Venkateswara Rao A, Kulkarni MM, Amalnerkar DP, Seth T (2003) J Non-Cryst Solids 330:187–195
Shirtcliffe NJ, McHale G, Newton MI, Perry C (2003) Langmuir 19:5626–5631
Shang HM, Wang Y, Limmer SJ, Chou TP, Takahashi K, Cao GZ (2005) Thin Solid Films 472:37–43
Miwa M, Nakajima A, Fujishima A, Hashimoto K, Watanabe T (2000) Langmuir 16:5754–5760
Nakajima A, Hashimoto K, Watanabe T (2000) Langmuir 16:7044–7047
Tadanaga K, Morinaga J, Minami T (2000) J Sol-Gel Sci Technol 19:211–214
Tadanaga K, Kitamuro K, Matsuda A, Minami T (2003) J Sol-Gel Sci Technol 26:705–708
Nakajima A, Abe K, Hashimoto K, Watanabe T (2000) Thin Solid Films 376:140–143
Satoh K, Nakazumi H, Morita M (2003) J Sol-Gel Sci Technol 27:327–332
Ming W, Wu D, van Benthem R, de With G (2005) Nano Lett 5:2298–2301
Lau KKS, Bico J, Teo KBK, Chhowalla M, Amaratunga GAJ, Milne WI, McKinley GH, Gleason KK (2003) Nano Lett 3:1701–1705
Favia P, Cicala G, Milella A, Palumbo F, Rossini P, d’Agostino R (2003) Surf Coat Technol 169:609–612
Li M, Zhai J, Liu H, Song YL, Jiang L, Zhu D (2003) J Phys Chem B 107:9954–9957
Yun KS, Cho IJ, Bu JU, Kim CJ and Yoon E (2002) IEEE Journal of MEMS 11:454–461
Lee W, Jin MK, Yoo WC, Lee JK (2004) Langmuir 20:7665–7669
Teshima K, Sugimura H, Inoue Y, Takai O, Takano A (2003) Langmuir 19:10624–10627
Onda T, Sbuichi S, Satoh N, Tsujii K (1996) Langmuir 12:2125–2127
Shibuichi S, Onda T, Satoh N, Tsujii K (1996) The Journal of Physical Chemistry 100:19512–19517
Erbil HY, Demirel AL, Avci Y, Mert O (2003) Science 299:1377–1380
Feng L, Song Y, Zhai J, Liu B, Xu J, Jiang L, Zhu D (2003) Angew Chem Int Ed 42:800–802
Fu Q, Rao VR, Basame SB, Keller DJ, Artyushkova K, Fulghum JE, Lpóez GP (2004) Journal of the American chemical. Society 126:8904–8905
Sun T, Wang G, Feng L, Liu B, Ma Y, Jiang L, Zhu D (2004) Angew Chem Int Ed 43:357–360
Zhai L, Cebeci FC, Cohen RE, Rubuner MF (2004) Nano Lett 4:1349–1353
Lin K (2007) R, Kuo C H, Kuo L C, yang K H, Leung M k, Hsieh K H. Eur Polym J 43:4279–4288
Randall D, Lee S (eds) (2002) The polyurethanes book. Wiley, New York
Suresh KI, Kishanprasad VS (2005) Ind Eng Chem Res 44:4504–4512
Green RJ, Corneillie S, Davies J, Davies MC, Roberts CJ, Schacht E (2000) Langmuir 16:2744–2750
Li Y, Kang W, Stoffer JO, Chu B (1994) Macromolecules 27:612–614
Crenshaw BR, Weder C (2006) Macromolecules 39:9581–9589
Zhang C, Xia Y, Chen R, Huh S, Johnston P, Kessler MR (2013) Green Chem 15:1477–1484
Zhang C, Vennerberg D, Kessler MR (2015) J Appl Polym Sci 132: doi:10.1002/APP.42515
Zhang C, Wu. H, Kessler M.R, (2015) Polymer 69: 52–57.
Engels HW, Pirkl HG, Albers R, Albach RW, Krause J, Hoffmann A, Casselmann H, Angew JD (2013) Chem Int Ed 52:9422–9441
Pfister DP, Xia Y, Larock RC (2011) Chem Sus Chem 4:703–717
Špirkova M, Duszova A, Poreba R, Kredatusova J, Bureš R, Faberova M, Šlouf M (2014) Compos Part B 67:434–440
Jimenez GA, Jana SC (2009) Polym Eng Sci 49:2020–2030
Murali Sankar R, Seeni Meera K, Mandal AB, Jaisankar SN (2013) High Performance Polymers 25:135–146
Hepburn C (1992) Polyurethane elastomers. Elsevier Science Publishers, London
Bengtson B, Feger C, MacKnight W (1985) J and Schneider N S. Polymer 26:895–900
Brunette CM, Hsu SL, Rossman M, Mac-Knight WJ, Schneider NS (1981) Polym Eng Sci 21:668–674
Brunette CM, Hsu SL, MacKnight WJ, Schneider NS (1981) Polym Eng Sci 21:163–171
Špírková M, Matĕjka L, Hlavatá D, Meissner B, Pytela J (2000) J Appl Polym Sci 77:381–389
Krishnan PSG, Ayyaswamy K, Nayak SK (2013) J Macromol Sci A 50:128–138
Ducruet N, Delmotte L, Schrodj G, Stankiewicz F, Desgardin N, Vallat MF (2013) J Appl Polym Sci 128:436–443
Bae SB, Kim CK, Kim YC, Chung IJ (2013) J Appl Polym Sci 129:3089–3095
Večeřa M, Prokůpek L, Machotova J, Šňuparek J (2013) J Appl Polym Sci 128:2277–2282
Wright JD and Sommerdijk NAJM, Sol-gel materials: chemistry and applications. (2000) Vol. 4, CRC press, Washington, D.C.
Brinker CJ, Scherer GW (1990) Sol-gel science: the physics and chemistry of sol-gel processing. Gulf Professional Publishing, London
Wenzel RN (1936) Ind Eng Chem 28:988–994
Petrović ZS, Zavargo Z, Fly JH, Macknight WJ (1994) J Appl Polym Sci 51:1087–1095
Malay O, Oguz O, Kosak C, Yilgor E, Yilgor I, Menceloglu YZ (2013) J Polym 54:5310–5320
Khosravi A, Sadeghi M, Banadkohi HZ, Talakesh MM (2014) Ind Eng Chem Res 53:2011–2021
Author information
Authors and Affiliations
Corresponding authors
Electronic supplementary material
ESM 1
(DOCX 102 kb)
Rights and permissions
About this article
Cite this article
Yang, CH., Pan, YW., Guo, JJ. et al. Synthesis and application of polyurethane basic organic-inorganic hybrid materials as highly hydrophobic coatings. J Polym Res 23, 29 (2016). https://doi.org/10.1007/s10965-016-0919-3
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10965-016-0919-3