Abstract
The glycolysis of poly (ethylene-terephthalate) with bisphenol-A at certain ratios of PET/BPA was carried out in an autoclave reactor at different temperatures for varying periods of time. Then the glycolyzed products were utilized together with bisphenol-A for the synthesis of polyarylates through interfacial polycondensation. The polyarylates obtained (referred to as b/g-polyarylates in this article) possess good thermal characteristics but have lower mechanical strength than typical polyarylate synthesized from pure bisphenol-A by use of the same method. Blending the b/g-polyarylate with polycarbonate improved the impact strength significantly. As a whole, glycolysis with bisphenol-A followed by synthesis of polyarylate through interfacial polycondensation provided a feasible route for the reuse of poly(ethylene terephthalate).
Similar content being viewed by others
References
D. C. Wang, L. W. Chen and W. Y. Chiu, Die Ang. Res., Makro. Chem., 230, 47 (1995).
A. Golovoy, M. F. Cheung and H. V. Qene, Polym. Eng. Sci., 27, 1642 (1987).
G. F. L. Ehlers, K. R. Fisch and W. R. Powell, J. Polym. Sci., 7, 2969 (1969).
J. I. Eguiazabal, M. E. Calahorra, M. M. Cortazar and G. M. Guzman, J. Polym. Sci., Polym. Lett. Ed., 24, 77 (1986).
H. B. Tsai and Y. D. Lee, J. Polym. Sci., Chem. Ed., 25, 1505 (1987).
H. B. Tsai and Y. D. Lee, J. Polym. Sci., Chem. Ed., 25, 2195 (1987).
Y. D. Lee and H. B. Tsai, J. Polym. Sci., Chem. Ed., 26, 2039 (1988).
T. Y. Tseng, N. J. Chu and Y. D. Lee, J. App. Polym. Sci., 41, 1651 (1990).
D. L. Lee, D. C. Wang and W. Y. Chiu, J. Polym. Res., 1, 1 (1994).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Wang, DC., Wang, CY., Chiu, WY. et al. Synthesis of polyarylate through interfacial polycondensation by use of glycolyzed products of poly(ethylene terephthalate) glycolysis with bisphenol-a. J Polym Res 4, 9–16 (1997). https://doi.org/10.1007/s10965-006-0002-6
Issue Date:
DOI: https://doi.org/10.1007/s10965-006-0002-6