Abstract
In this paper, a new approach for characterizing dispersion in nano-enhanced polymers and polymer composites using nanomechanical characterization is developed. Dispersion of Carbon nanofibers (CNFs) as a model nanoscale ingredient is characterized in two model polymer systems: (a) a thermoplastic polymer processed using a Twin Screw Extruder, and (b) a thermoset epoxy processed using sonication during solvent processing. For the first time, the modulus of agglomerated nanofibers was isolated from the polymer matrix enhanced with dispersed nanofibers by using nanomechanical characterization. Thus, it was possible to use these nanomechanical properties in a microstructural model using a Rule-of-Mixtures (ROM) formulation to determine the fraction of dispersed nanofibers, which yielded a dispersion limit of 3 vol% CNFs in the nano-enhanced thermoplastic polymer and 3.5 vol% CNFs in the nano-enhanced thermoset epoxy. It was also possible to predict the modulus measured using microtensile testing, and to determine an effective modulus of 30 GPa for the CNFs, which was attributed to a spring-like effect from kinking along the nanofibers. Applying this characterization to control of dispersion through sonication in the nano-enhanced thermoset epoxy, it was possible to determine the degree of dispersion with sonication time which was described using an Avrami equation. Finally, a carbon-fiber mat was used to create a model nano-enhanced polymer composite whose properties were found to be insensitive to sonication time due to filtering effects from the carbon-fiber mat and varied with CNF concentration in a manner where the CNF modulus could be extrapolated to 30 GPa, consistent with the nano-enhanced polymers.
Similar content being viewed by others
References
Bervas M (2005) PhD Dissertation, Rutgers University
Kubacki RM (2006) In: Proceedings of the 56th electronic components and technology conference, p 161
Zhong D, Kim KH, Park IW, Dennin T, Mishra B, Levashov E, Moore JJ (2004) In: Nanostructured thin films and nanodispersion strengthened coatings, vol 155. Kluwer Academic Publishers, Netherlands, p 91
Veedu VP, Cao C, Li X, Ma K, Soldano C, Swastik K, Ajayan PM, Ghasemi-Nejhad MN (2006) Nat Mater 5:452
Balazs AC, Emrick T, Russell TP (2006) Science 314:1107
Allaoui A, Bai S, Cheng HM, Bai JB (2002) Compos Sci Technol 62:1993
Gojny FH, Wichmann MHG, Kopke U, Fiedler B, Schulte K (2004) Compos Sci Technol 64:2363
Gojny FH, Wichmann MHG, Kopke U, Fiedler B, Schulte K (2005) Compos Sci Technol 65:2300
Seyhan AT, Gojny FH, Tanoglu M, Schulte K (2007) Eur Polym J 43:374
Zhou Y, Pervin F, Lewis L, Jeelani S (2007) Mater Sci Eng A 452–453:657
Zhou Y, Pervin F, Lewis L, Jeelani S (2008) Mater Sci Eng A 475:157
Kepple KL, Sanborn GP, Lacasse PA, Gruenberg KM, Ready WJ (2008) Carbon 46:2026
Ajayan PM, Schadler LS, Braun PV (2203) Nanocomposite science and technology. Wiley-VCH, Weinheim
Esawi AMK, Farag MM (2007) Mater Des 28:2394
Zhou RJ, Burkhart T (2010) J Mater Sci 45:3016. doi:10.1007/s10853-010-4304-z
Ciecierska E, Boczkowska A, Kurzydlowski KJ (2010) J Mater Sci 45:2305. doi:10.1007/s10853-009-4192-2
Armentano I, Del Gaudio C, Bianco A, Dottori M, Nanni F, Fortunati E, Kenny JM (2009) J Mater Sci 44:4789. doi:10.1007/s10853-009-3721-3
Sumfleth J, Adroher XC, Schulte K (2009) J Mater Sci 44:3241. doi:10.1007/s10853-009-3434-7
Kota AK, Cipriano BH, Gershon AL, Duesterberg M, Powell D, Raghavan SR, Bruck HA (2007) Macromolecules 40:7400
Kota AK, Cipriano BH, Duesterberg M, Powell D, Raghavan SR, Bruck HA (2007) Nanotechnology. doi:10.1088/0957-4484/18/50/50575
Kota AK, Murphy L, Strohmer T, Bigio DI, Bruck HA, Powell D (2008) AICHE J 54:1895
Cipriano BH, Kota AK, Gershon AL, Laskowski CJ, Kashiwagi T, Bruck HA, Raghavan SR (2008) Polymer 49:4846
Gershon AL, Kota AK, Bruck HA (2009) J Compos Mater 43:2587
Ozkan T, Naraghi M, Chasiotis I (2010) Carbon 48:239
Acknowledgements
This work was supported by ONR award number N000140910640.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gershon, A.L., Cole, D.P., Kota, A.K. et al. Nanomechanical characterization of dispersion and its effects in nano-enhanced polymers and polymer composites. J Mater Sci 45, 6353–6364 (2010). https://doi.org/10.1007/s10853-010-4597-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-010-4597-y