Abstract
Applying the alumina-magnesia-silica equilibrium phase diagram as the fundamental basis, the three sillimanite minerals, kyanite, andalusite and sillimanite, were processed in the presence of magnesia to produce spinel-forsterite refractory aggregates. Both conventional ball milling and high-energy attrition milling were applied to reduce the particle size of the minerals and mix them. Ball milling achieved micrometer size particles, while the attrition milling reduced the particles to the nanometer scale. Firing in air between 1,200° and 1,700 °C produced results that are a combination of the individual mineral decompositions and the spinel/forsterite formation. These effects were separated to address the reaction/densification processes and obtain dense spinel/for sterite refractory aggregates with fine microstructures.
Similar content being viewed by others
References
Balmori-Ramirez, H., and Bradt, R.C., 2000, “Effects of attrition milling on the decomposition and sintering of the sillimanite, or AI2SiO5 group of minerals,” in Sintering 1999 Proceedings, R.M German, G.L. Messing and R.G. Cornwall, eds., The Pennsylvania State University, State College, Pennsylvania, pp. 153–158.
Chang, L., 2002, Industrial Mineralogy, Prentice Hall Inc., New Jersey, pp. 373–385
Cunha, F.N., and Bradt, R.C., 2000, “Expansion during the reaction sintering of magnesia and alumina to magnesium aluminate spinel,” in Sintering 1999 Proceedings, R.M. German, G.L. Messing, and R.G. Cornwall, eds., The Pennsylvania State University, University Park, Pennsylvania, pp. 201–206.
Grobbelaar, A.P., 1994, “Andalusite” in Industrial Minerals and Rocks, 6th Edition, D.D. Carr, ed., Society of Mining, Metallurgy, and Exploration, Inc., Littleton, Colorado, pp. 913–920.
Guse, W., Saalfeld, H., and Tjandra, J., 1979, “Thermal transformation of sillimanite single crystals,” Neues Jahrb. Mineral. Monatsh, Abt. A, pp. 175–185.
Hoyer, J.L., 1994, “Processing technique for advanced ceramics,” Mat. and Mfg. Proc, Vol. 9, No. 4, pp. 623–636.
Hoyer, J.L., Bennett, J.P., and Liles, K.J., 1990, “Properties of TiAION/spinel ceramic composites,” Ceramic Engineering Science Proceedings, Vol. 11, Nos. 9–10, pp. 1423–1439.
Hulsmans, A., Schmucker, M., Mader, W., and Schneider, H., 2000, “The transformation of andalusite to mullite and silica: Part I. Transformation mechanism in [001] (A) direction,” Am. Mineralogist, Vol. 85, Nos. 7–8, pp. 980–986.
International Center for Diffraction Data, “Powder Diffraction File, Alphabetical Indexes, Inorganic Phases, Sets 1–43, Card Nos. 4–829,11–46,11–695,15–776, 19–768, 21–1152, 34–189, 38–471, 39–376.
Jain, D.C., Brown Jr., J.J., and Kay, C.B., 1974, “Study of thermal decomposition of kyanite using density measurements,” Am. Ceram. Soc. Bull., Vol. 53, No. 9, pp. 650–653.
Rankin, G.A., and Merwin, H.E., 1918, “The ternary system MgO-AI2O3-SiO2,” Am. J. Sci., Vol. 45 (4th Series), pp. 301–325.
Ribbe, P.B., 1982, “Kyanite, andalusite, sillimanite, and other aluminum silicates,” in Reviews of Mineralogy, Vol. 5, Washington, DC, pp. 189–214.
Sainz, M.A., Serrano, F.J., Bastida, J., and Caballero, A., 1997, “Microstructural evolution and growth of crystallite size of mullite during thermal transformation of kyanite,” J. Eur. Ceram. Soc, Vol. 17, pp. 1277–1284.
Schneider, H., and Majdic, A., 1981, “A Preliminary investigation on the kinetics of high temperature transformation of silliminate to 3/2 mullite plus silica and comparison with the behavior of andalusite and kyanite,” Sci. Ceram., Vol. 11, pp. 191–196.
Schneider, H., Okada, K., and Pask, J.A., 1994, Mullite and Mullite Ceramics, John Wiley & Sons Inc., New York, pp. 108–113.
Sweet, P.C., 1994, “Kyanite and related minerals,” in Industrial Minerals and Rocks, 6th Edition, D.D. Carr, ed., Society of Mining, Metallurgy, and Exploration, Inc., Littleton, Colorado, pp. 921–927.
The Mineral Gallery, Service of Amethyst Galleries, Inc., https://doi.org/mineral.galleries.com.
Tomba, A., Camerucci, M.A., Urretavizcaya, G., Cavalieri, A.L., Sainz, M.A., and Caballero, A., 1999, “Elongated mullite crystals obtained from high temperature transformation of sillimanite” Ceramics International, Vol. 25, pp. 245–252.
Tripathi, H.S., Das, S.K., and Banerjee, G., 2000, “Thermal shock behavior of high alumina aggregates derived from sillimanite beach sand with and without Fe2O3 doping,” Ceramics International, Vol. 26, pp. 1–6.
Tripathi, H.S. and Banerjee, G. 1998, “Synthesis and mechanical properties of mullite from beach sand sillimanite: Effect of TiO2,” J. Eur. Ceram. Soc, Vol. 18, pp. 2081–2087.
Varley, E.R., 1968, Sillimanite, Chemical Publishing Company, Inc., New York, pp. 1–12.
Wilson, H.H., 1969, “Mullite formation from the sillimanite group minerals,” Am. Ceram. Soc Bull., Vol. 48, No. 8, pp. 796–797.
Winter, J.K., and Ghose, S., 1979, “Thermal expansion and high temperature crystal chemistry of the AI2SiO5 polymorphs,” American Mineralogist, Vol. 64, pp. 573–586.
Author information
Authors and Affiliations
Additional information
Nonmeeting paper number 02-329. Discussion of this peer-reviewed and approved paper is invited and must be submitted to SME Publieations Dept. prior to Feb. 29, 2004.
Rights and permissions
About this article
Cite this article
Cunha-Duncan, F.N., Balmori-Ramirez, H., Sorrell, C.C. et al. Synthetic spinel-forsterite refractory aggregates from the sillimanite minerals. Mining, Metallurgy & Exploration 20, 143–152 (2003). https://doi.org/10.1007/BF03403147
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03403147