Abstract
The results of a four points bending test on a box girder are presented. The experiment includes initial loading cycles allowing residual stresses relief. Two indirect methods are presented for the evaluation of the residual stresses levels. The moment curvature relationship is established for a large range of curvature and the ultimate bending moment and the post buckling behavior are characterized. The distribution of stresses along the loading process is presented and the increasing lack of effectiveness of the stiffened panels is identified including an important inefficiency of the panel under tension load.
Similar content being viewed by others
References List
Adamchak, J. C. (1984) - “An approximate method for estimating the collapse of a ship’s hull in preliminary design”. Proceedings, Ship Structures Symposium ’84. pp 37–61.
Billingsley, D. W. (1980) - “Hull girder response to extreme bending moments”. Proceedings, 5th STAR Symposium: SNAME; pp 51–63.
Caldwell, J. B. (1965) - “Ultimate longitudinal strength” Transactions of RINA.; 107: pp 411–430.
Dow, R. (1991) - “Testing and analysis of a 1/3-scale welded steel frigate model”. Advances in Marine Structures 2. C.S. Smith and R.S. Dow eds. Elsevier Applied Science; pp 749–773.
Dowling, P. J.; Chatterjee, S.; Frieze, P., and Moolani, F. M. (1973) - “Experimental and predicted collapse behaviour of rectangular steel box girders”. Proceedings, International Conference on Steel Box Girder Bridges. London.
Faulkner, D. (1965) - contribution to the discussion of “Ultimate longitudinal strength” by J. Caldwell. Transactions of RINA; 107.
Gordo, J. M. and Guedes Soares, C. (1993) - “Approximate load shortening curves for stiffened plates under uniaxial compression”. Integrity of Offshore Structures - 5, D. Faulkner, M. J. Cowling, A. Incecik and P. K. Das; (Eds.), Glasgow, Warley, UK: EMAS; pp 189–211.
Gordo, J. M. and Guedes Soares, C. (1996) - “Approximate method to evaluate the hull girder collapse strength”. Marine Structures. 9(1); pp 449–470.
Gordo, J. M., Guedes Soares, C. and Faulkner, D. (1996) - “Approximate assessment of the ultimate longitudinal strength of the hull girder”. Journal of Ship Research. 40(1); pp 60–69.
Guedes Soares, C., Dogliani, M., Ostergaard, C., Parmentier, G. and Pedersen, P. T. (1996) - “Reliability Based Ship Structural Design”. Transactions of the Society of Naval Architects and Marine Engineers. (104); pp 357–389.
Nishihara, S. (1984) - “Ultimate longitudinal strength of midship cross section”. Naval Arch. & Ocean Engng. 22; pp 200–214.
Smith, C. S. (1977) - “Influence of local compressive failure on ultimate longitudinal strength of a ship’s hull”. Proceedings, 3th Int. Symposium on Practical Design in Shipbuilding, Tokyo, pp 73–79.
Sun, H. H. and Guedes Soares, C. (2003) - “Reliability-Based Structural Design of Ship-Type FPSO Units” Journal of Offshore Mechanics and Arctic Engineering.; (125); pp 108–113.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gordo, J.M., Guedes Soares, C. Experimental Evaluation of the Ultimate Bending Moment of a Box Girder. Mar. Syst. Ocean Technol. 1, 33–46 (2004). https://doi.org/10.1007/BF03449192
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03449192