Abstract
The electrically heated catalyst “Emicat” has already proved itself in series applications with the introduction of American ULEV legislation. Due to continuous increase of the efficiency factor of modern engines going together with the reduction of exhaust gas temperatures, increased requirements on fuel consumption and higher demands on exhaust gas treatment it could become a solution for future catalytic converter concepts.
Similar content being viewed by others
References
Hanel, F. J.; Otto, E.; Brück, R.: “Electrically Heated Catalytic Converter (EHC) in the BMW Alpina B12 5.7 Switch-Tronic”, 1996 SAE International Congress and Exposition Detroit, Michigan Detroit, Michigan (USA), 1996
Hanel, F. J.; Otto, E.; Brück, R.; Nagel, T.; Bergau, N.: “Practical Experience with the EHC System in the BMW Alpina B12”, 1997 SAE International Congress and Exposition Detroit, Michigan Detroit, Michigan (USA), 1997
Wiartalla, A.; Severin, C.; Rosefort, Y.; Kemper, H.; Kwee, H.: “Diesel Hybrid and Exhaust After treatment — Synergies and Optimization Potentials”, MinNox Berlin, Juni 2008
Dorenkamp, R.: “Die Abgasnachbehandlung als Baustein zur nachhaltigen CO2- und Emissionsreduzierung”, FAD Dresden, November 2009
Liebl, J.: „BMW Efficient Dynamics — Emissionsreduzierung kann auch faszinieren“, Emission Control Dresden, Mai 2008
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Maus, W., Brück, R., Konieczny, R. et al. Electrically heated catalyst for thermal management in modern vehicle applications. MTZ Worldw 71, 34–39 (2010). https://doi.org/10.1007/BF03227013
Issue Date:
DOI: https://doi.org/10.1007/BF03227013