Abstract
In this work, an elastic-plastic stress analysis has been conducted for silicon carbide fiber reinforced magnesium metal matrix composite beam. The composite beam has a rectangular cross section. The beam is cantilevered and is loaded by a single force at its free end. In solution, the composite beam is assumed perfectly plastic to simplify the investigation. An analytical solution is presented for the elastic-plastic regions. In order to verify the analytic solution results were compared with the finite element method. An rectangular element with nine nodes has been choosen. Composite plate is meshed into 48 elements and 228 nodes with simply supported and in-plane loading condations. Predictions of the stress distributions of the beam using finite elements were overall in good agreement with analytic values. Stress distributions of the composite beam are calculated with respect to its fiber orientation. Orientation angles of the fiber are chosen as 0°, 30°, 45°, 60° and 90°, The plastic zone expands more at the upper side of the composite beam than at the lower side for 30°, 45° and 60° orientation angles. Residual stress components ofσ x andτ xy are also found in the section of the composite beam.
Similar content being viewed by others
References
Bahei-El-Din, Y. A. and Dvorak, G. J., 1982, “Plasticity Analysis of Laminated Composite Plates,”Transactions of the ASME, Vol. 49, pp. 740–746.
Canumalla, S., Dynan, S. A. and Green, D. J., 1995, “Mechanical Behaviour of Mullite Fiber Reinforced Aluminum Alloy Composites,”Journal of Composite Materials, Vol. 29, pp. 653–69.
Chou, T. W., Kelly, A. and Okura, A., 1985, “Fibre-Reinforced Metal-Matrix Composites,”Journal of Composite Materials, Vol. 16, pp. 187–206.
Jeronimidis, G. and Parkyn, A. T., 1998, “Residual Stress in Carbon Fibre-Thermoplastic Matrix Laminates,”Journal of Composite Materials, Vol. 22, No. 5, pp. 401–15.
Jones, R. M., 1975, Mechanics of Composite Materials, Kogakuska, Tokyo: McGraw-Hill.
Kang, C. G. and Kang, S. S., 1994, “Effect of Extrusion on Fiber Orientation and Breakage of Aluminar Short Fiber Composites,”Journal of Composite Materials, Vol. 28, pp. 155–170.
Karakuzu, R. and Sayman, O., 1994, “Elasto-Plastic Finite Element Analysis of Orthotropic Rotating Discs with Holes,”Computers and Structures, Vol. 51, pp. 695–703.
Karakuzu, R., 1997, “Exact Solution of Elasto-Plastic Stresses in a Metal-Matrix Composite Beam of Arbitrary Orientation Subjected to Transverse Loads,”Composite Science and Technology, Vol. 56, pp. 1383–1389.
Karakuzu, R., Ozel, A. and Sayman, O., 1997, “Elasto-Plastic Finite Element Analysis of Metal Matrix Plates with Edge Notches,”Composite Structures, Vol. 63, pp. 551–558.
Lekhnitskii, S. G., 1968, Anisotropic Plates. Gordon and Breach Science Publishers.
Lekhnitskii, S. G., 1981, Theory of Elasticity of an Anisotropic Body. Moskow: Mir Publishers.
Sayman, O., 1998, “Elasto-Plastic Stress Analysis in Stainless Steel Fiber Reinforced Aluminum Metal Matrix Laminated Plates Loaded Transversely,”Composite Structures, Vol. 43, pp. 147–154.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Okumus, F. An elastic-plastic stress analysis in silicon carbide fiber reinforced magnesium metal matrix composite beam having rectangular cross section under transverse loading. KSME International Journal 18, 221–229 (2004). https://doi.org/10.1007/BF03184731
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF03184731