Zusammenfassung
Ziel ist die analyse der Neigungslage des Beckens im Liegen und im Stehen bzw. die Beobachtung der Stabilität der Beckenfläche als Bezugsfläche für die Acetabulum-Prothese-Transplantation. 72 Testpersonen wurden je nach Status ihres Pfannengelenks in 3 Gruppen eingeteilt: Gruppe 1 “mit gesundem Pfannengelenk”, Gruppe 2 “mit Arthritis” und Gruppe 3 “nach Implantation der Hüftendoprothese”. Unter dem Einsatz von 3D-Digital-Instrument wurde die Flächen-Neigung vor dem Becken jeweils im Liegen und im Stehen gemessen und die Messwerte wurden verglichen. Die Flächen-Neigungen vor dem Becken bei allen 3 Gruppen (mit gesundem Pfannengelenk/mit Arthritis/nach Operation) im Liegen sind: 6.37°±3.70°, 6.47°±3.52° und 4. 56°±2.39°. Im Stehen sind es 7.33°±3. 08°, 6.60°±3.45° und 6.74°±3.43°. Der Flächen-Neigungsunterschied vor dem Becken im Liegen und im Stehen hat keine grosse Bedeutung (P>0.05). Die Änderung der Flächen-Neigung vor dem Becken vom Liegen bis zum Stehen ist kleiner als 2.5°. Die Fläche vor dem Becken (pelvic anterior plane, PAP) als Bezugsfläche für Hüftpfanne-Prothese-Transplantation bei klinischer Operation ist stabil und verläßlich.
Literatur
Daly P J, Morrey B F. Operative correction of an unstable total hip arthroplasty. J Bone Joint Surg Am, 1992, 74: 1334–1343
Hirakawa K, Mitsugi N, Koshino T,et al. Effect of acetabular cup position and orientation in cemented total hip arthroplasty. Clin Orthop, 2001, 388: 135–142
DiGioia A M, Jaramaz B, Blackwell Met al. Image guided navigation system to measure intraoperatively acetabular implant alignment. Clin Orthop, 1998, 355: 8–22
Kennedy J G, Rogers W B, Soffe K Eet al. Effect of acetabular component orientation on recurrent dislocation, pelvic osteolysis, polyethylene wear, and component migration. J Arthroplasty, 1998, 13: 530–534
Mckibbin B. Anatomical factors in the stability of the hip joint in the newborn. J Bone Joint Surg 1970, 52B: 148–159
Lewinnek GE, Lewis J L, Tarr Ret al. Dislocations after total hip-replacement arthroplasties. J Bone Joint Surg Am, 1978, 60:217–220
Zheng G, Marx A, Langlotz Uet al. A hybrid CT-free navigation system for total hip arthroplasty. Comput Aided Surg, 2002, 7: 129–145
Van Hellemondt G, De Kleuver M, Kerckhaert Aet al. Computer-assisted pelvic surgery: anin vitro study of two registration protocols. Clin Orthop, 2002, 405: 287–293
Bergmann G, Deuretzbacher G, Heller Met al. Hip contact forces and gait patterns from routine activities. J Biomech, 2001, 34: 859–71
Jaramaz B, DiGioia A M, Blackwell Met al. Computer assisted measurement of cup placement in total hip replacement. Clin Orthop, 1998, 354: 70–81
Nishihara S, Sugano N, Nishii Tet al. Measurements of pelvic flexion angle using three-dimensional computed tomography. Clin Orthop, 2003, 411: 140–151
Author information
Authors and Affiliations
Additional information
ZENG Hui, male, born in 1968, Professor
Rights and permissions
About this article
Cite this article
Hui, Z., Mayr, E., Bin, K. et al. Abmessung und Analyse der Bezugsfläche von Acetabulum-Prothese-Transplantation in unterschiedlichen Körperlagen. J. Huazhong Univ. Sci. Technol. [Med. Sci.] 26, 322–324 (2006). https://doi.org/10.1007/BF02829564
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02829564