Skip to main content
Log in

Non-destructive testing and evaluation for structural integrity

  • Integrity Of Engineering Components
  • Published:
Sadhana Aims and scope Submit manuscript

Abstract

Reliable performance of a component or structure depends on pre-service quality of the component and in-service degradation of the component under operating conditions. The role of non-destructive evaluation (NDE) in ensuring pre-service quality and also monitoring in-service degradation to avoid premature failure of the components/structures is ever increasing. There are many NDE techniques based on various physical principles. The end objective of NDE is detection and characterisation of anomalies such as defects, stresses and microstructural degradations in materials. This is accomplished by establishing correlation between a nondestructively measured physical/derived parameter and quantitative information on defects/stresses/microstructures. The NDE information together with design parameters are taken into consideration for evaluation of integrity and life assessment of the components/structures. In this paper, a brief description of the physical concepts of NDE methods and the physical/derived parameters that are used for assessing defects, stresses and microstructures are given. A few case studies highlighting the importance of non-destructive testing and evaluation for structural integrity assessment are also discussed based on the investigations carried out at the authors’ laboratory. Emerging concepts like intelligent processing of materials, expert systems, neural networks, use of multisensors with fusion of data and exploitation of signal analysis and imaging approaches are also addressed in this paper.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • Arnold W 1990 Tomography of advanced ceramics.Proc. of Indo-German Conf. on Material Characterisation by Non-Destr. Test Techniques (Bombay: BARC)

    Google Scholar 

  • Babu Rao C, Baldev Raj 1990 Laser techniques in metrology and materials evaluation.Met. Mater. Processes 2: 93–116

    Google Scholar 

  • Babu Rao C, Vanmathi R, Baldev Raj 1992 Profiling of FBTR clad tubes using projected interferometry.Proc. of laser symposium Madras, pp. 338–339

  • Baldev Raj 1990Acoustic emission for characterising deformation and fracture during tensile testing in austenitic stainless steels. PhD dissertation, Indian Institute of Science, Bangalore

    Google Scholar 

  • Baldev Raj 1992 Looking into future: New techniques in NDT and their potentials.Proc. of National Seminar NDE-92 (eds) C R L Murthy, Baldev Raj, O Prabhakar, A Sreenivasulu (Bangalore: Interline) 1: 23–38

    Google Scholar 

  • Baldev Raj 1993a Status of NDE research and applications in India.Proc. of the 7th Asia-Pacific Conf. on Non-Destr. Test. Shanghai, China, pp. 18–37

  • Baldev Raj 1993b Inspection of MAPS II turbine LP rotor. Internal report No. IGC/DPEND/93/2

  • Baldev Raj 1994a Neutron radiography and gaging — an overview.Proc. of First Nat. Workshop on Neutron Radiography and Gauging, Shar, Sriharikota

  • Baldev Raj 1994b Intelligent processing of materials.Proc. of Conf. on Adv. Non-Destr. Test. Tecniques (Hyderabad: Nuclear Fuel Complex)

    Google Scholar 

  • Baldev Raj, Ananthakrishna G, Kalyanasundaram P, Barat P, Jayakumar T 1990a Stimulated amplification of acoustic emission signals during deformation.Scr. Metall. 24: 69–74

    Article  Google Scholar 

  • Baldev Raj, Babu Rao C, Shyamsunder M T, Venkatraman B, Bhattacharya D K 1986 NDE of pressurised vessel by laser holography.Proc. of National Seminar on Non-Destr. Eval. in Eng. Industry, Coimbatore, D1: 1–5

    Google Scholar 

  • Baldev Raj, Jayakumar T, Thavasimuthu M 1994aPractical non-destructive testing (to be published)

  • Baldev Raj, Jayakumar T, Rao B P C 1994b Non-destructive test techniques for assessment of cracks.J. Aeronaut. Soc. India 46: 101–105

    Google Scholar 

  • Baldev Raj, Kalyanasundaram P, Jayakumar T, Barat P 1989 Influence of grain size on frequency spectra of AE signal generated during tensile deformation in an AISI type 316 stainless steel.J. Acoustic Emission 8: S140-S144

    Google Scholar 

  • Baldev Raj, Thavasimuthu M, Subramanian C V, Kalyanasundaram P, Rajagopalan C 1992 Ultrasonic evaluation of end cap weld joints of PHWR fuel element using signal analysis.Proc. 13th World Conf. on Non-Destr. Test (eds) C Hallai, H Kulscar (Amsterdam: Elsevier) 1: 1065–1070

    Google Scholar 

  • Baldev Raj, Venkatraman B 1989Ionising radiations for non-destructive evaluation. Indian Institute of Radiation Physics, Kalpakkam, Monograph, Chapter ISRP (K)-TD-1

    Google Scholar 

  • Baldev Raj, Venkatraman B, Babu Rao C 1990b An overview of non-destructive applications of thermography.J. Non-Destr. Eval. 10: 1–13

    Google Scholar 

  • Barat P, Baldev Raj, Bhattacharya D K 1982 A standard procedure for eddy current testing of stainless steel, thin walled nuclear fuel element cladding tubes.Non-Destr. Test Int. 15: 251–255

    Google Scholar 

  • Beissner R E, Matzkanin G A, Teller C M 1980 New applications of magnetic leakage field methods. NDT Information Analysis Centre, Southwest Research Institute, Texas, Report No. NTIAC-80-1: 1–45

    Google Scholar 

  • Bhattacharya D K 1994Microstructural characterisation of 2·25 Cr-1 Mo steel, 9 Cr-1 Mo steel and 17-4 PH steel by magnetic Barkhausen noise analysis technique. PhD dissertation, Indian Institute of Science, Bangalore (submitted)

    Google Scholar 

  • Bhattacharya D K, Jayakumar T, Baldev Raj 1992a Magnetic methods for characterisation of microstructure, creep, fatigue damage and residual stresses.Proc. of National Seminar NDE-92 (eds) C R L Murthy, Baldev Raj, O Prabhahar, A Sreenivasulu (Bangalore: Interline) 1: 110–127

    Google Scholar 

  • Bhattacharya D K, Jayakumar T, Palanichamy P, Baldev Raj 1993 Microstructural characterisation using ultrasonic velocity and attenuation measurements.Proc. 7th Asia-Pacific Conf. on Non-Destr. Test. Shanghai, China, pp. 110–126

  • Bhattacharya D K, Jayakumar T, Vaidyanathan S, Baldev Raj 1992b Magnetic Barkhausen noise analysis for the assessment of microstructures in heat treated 2·25 Cr-1 Mo and 17-4-PH steel.Proc. 13th Word Conf. on Non-Destr. Test (eds) C Hallai, H Kulscar (Amsterdam: Elsevier) 1: 424–428

    Google Scholar 

  • Bhattacharya D K, Rai S, Babu Rao C, Vaidyanathan S, Baldev Raj 1992c Assessment of residual stresses and post weld heat treatment in butt weld joints of 2·25 Cr-1 Mo steel tubes by X-ray diffraction technique and Barkhausen noise analysis.Proc. of National Welding Seminar, Calcutta

  • Bohn H, Kroning Met al 1987 Proving the capabilities of the phase array probe/ALOK inspection technique.Nucl. Eng. Des. 102: 361–367

    Article  Google Scholar 

  • Bray D E, Stanley R K 1989aNon-destructive evaluation—A tool for design, manufacturing and service (New York: McGraw-Hill) pp. 45–301

    Google Scholar 

  • Bray D E, Stanley R K 1989bNon-destructive evaluation—A tool for design, manufacturing and service (New York: McGraw-Hill) pp. 365–515

    Google Scholar 

  • Cielo P, Maldauge X, Deom A A, Lewak R 1987 Thermographic non-destructive evaluation of industrial materials and structures.Mater. Eval. 45: 452–460

    Google Scholar 

  • Cochran A McNab A, Hayward G 1991 Flaw monitoring using ultrasonic arrays in-situ.Br. J. Non-Destr. Test. 33: 495–505

    Google Scholar 

  • Collins R, Mirshekar S D, Micheal D H 1984 Surface current distributions around surface flaws in metals.Proc. R. Soc. A393: 159–170

    Google Scholar 

  • David W L 1981 Some implications of fracture mechanics for non-destructive testing.Proc. of Int. Adv. Non-Destr. Test (New York: Gordon and Breach) 7: 1–11

    Google Scholar 

  • Edwards I, Gros X E, Lowden D W, Strachan P 1993 Fusion of non-destructive testing data.Br. J. Non-Destr. Test. 35: 710–713

    Google Scholar 

  • Field G J, Dunn J T, Cheadle B A 1984 Analysis of the pressure tube failure at pickering ANGS unit 2. AECL-8335, Atomic Energy Canada Limited.

  • Forster F 1977 Non-destructive inspection of tubing and round billets by means of leakage flux probes.Br. J. Non-Destr. Test 19: 26–32

    Google Scholar 

  • Halmshaw R 1989Non-destructive testing 2nd edn (London: Edward Arnold)

    Google Scholar 

  • Holroyd T J 1986 Practical applications of acoustic emission.Br. J. Non-Destr. Test 28: 224–227

    Google Scholar 

  • Jayakumar T, Baldev Raj, Willems H 1991 Acoustic methods for characterisation of microstructures and deformation processes in nimonic alloy PE16.Trans. Indian Inst. Met. 44: 327–338

    Google Scholar 

  • Jayakumar T, Bhattacharya D K, Baldev Raj 1992a Ultrasonic characterisation of metals and alloys.Proc. of National Seminar NDE-92 (eds) C R L Murthy, Baldev Raj, O Prabhakar, A Sreenivasulu (Bangalore: Interline) 1: 128–140

    Google Scholar 

  • Jayakumar T, Bhattacharya D K, Baldev Raj 1994 Microstructural characterisation by ultrasonic and magnetic methods towards assessment of ageing induced damage in-service.Proc. of Ageing Management of Nucl. Facilities AMNF-94, (Bombay: BARC) S7-S33

    Google Scholar 

  • Jayakumar T, Bhattacharya D K, Palanichamy P 1993a Ultrasonic attenuation measurements for microstructural characterisation in 17-4 PH steel.J. Non-Destr. Eval. (in press)

  • Jayakumar T, Bhattacharya D K, Thavasimuthu M, Palanichamy P, Baldev Raj 1993b Ultrasonic measurements for microstructural characterisation in 9 Cr-1 Mo steel.Proc. 7th Asia-Pacific Conf. on Non-Destr. Test., Shanghai, China, pp. 216–222

  • Jayakumar T, Moorthy V, Bhattacharya D K, Baldev Raj 1992b Acoustic emission studies for leak detection.Proc. of 13th World Conf. on Non-Destr. Test. (eds) C Hallai, H Kulscar (Amsterdam: Elsevier) 1: 50–54

    Google Scholar 

  • Junger M, Brook C 1990 Beginners guide to principles, sensor selection and evaluation techniques for magnetic flux leakage technique.Br. J. Non-Destr. Test. 32: 513–515

    Google Scholar 

  • Juva A, Haarvisto M 1977 On the effects of microstructure on the attenuation of ultrasonic waves in austenitic stainless steels.Br. J. Non-Destr. Test. 19: 293–297

    Google Scholar 

  • Kalyanasundaram P, Baldev Raj, Barat P, Jayakumar T 1989 Reliability of detection of small defects in noisy weldments by advanced signals processing and pattern recognition techniques.Int. J. Pressure Vessels Piping 36: 103–109

    Article  Google Scholar 

  • Kalyanasundaram P, Baldev Raj, Kasiviswanathan K V, Jayakumar T, Murthy C R L 1992 Leak detection in pressure tubes of pressurised heavy water reactors by AE technique.Br. J. Non-Destr. Test. 34: 539–543

    Google Scholar 

  • Kalyanasundaram P, Rajagopalan C, Baldev Raj, Prabhakar O, Sarma D G R 1991a High sensitivity detection and classification of defects in austenitic weldments using cluster analysis and pattern recognition.Br. J. Non-Destr. Test. 33: 290–297

    Google Scholar 

  • Kalyanasundaram P, Rajagoplan C, Subramanian C V, Thavasimuthu M, Baldev Raj 1991b Ultrasonic signal analysis for defect characterisation in composite materialsBr. J. Non-Destr. Test. 33: 221–226

    Google Scholar 

  • Kasiviswanathan K V, Venkatraman B, Baldev Raj 1989 Neutron radiography facilities at IGCAR.Proc. of Post Irradiation Examination in Nuclear Programme, (Bombay: BARC) 2: 52–58

    Google Scholar 

  • Kasiviswanathan K V, Venugopal V, Baldev Raj 1986 Eddy current studies on stainless steel after mechanical working and thermal annealing.Proc. National Symposium on Metallography and Non-Destr. Test (Bombay: BARC) 1: 9/g/1-9/g/10

    Google Scholar 

  • Khanna A S, Jha B B, Baldev Raj 1987 The application of acoustic emission techniques in high temperature oxidation studies.J. Acoustic Emission 4: 209–213

    Google Scholar 

  • Kilmore R J, Ramachandran S 1989 Remote field eddy current testing of small diameter carbon steel tubes.Mater. Eval. 47: 32–36

    Google Scholar 

  • Kubiak E J 1968 Infrared detection of fatigue cracks and other near surface defects. Appl. Opt. 7: 1743–1751

    Article  Google Scholar 

  • Kurita M 1987 A new X-ray method for measuring residual stress and diffraction line broadness and its automation.Non-Destr. Test Int. 20: 277–283

    Google Scholar 

  • Libby H L 1971Introduction to electromagnetic non-destructive test methods (New York: Wiley-Interscience)

    Google Scholar 

  • McIntire P, Miller R K 1987Non-destructive testing handbook. Vol. 5, Acoustic Emission 2nd edn (Am. Soc. Non-Destr. Test.)

  • McLaughlin P V, McAssey V Deitrich R 1980 Non-destructive examination of fibre composite structure by thermal field technique.Non-Destr. Test Int. 13: 56–64

    Google Scholar 

  • Mix P E 1987Introduction to non-destructive testing — A training guide (New York: John Wiley & Sons)

    Google Scholar 

  • Moore J F, Tsang S 1977 Non-destructive test methods for the early prediction of fatigue cracks.Proc. Int. Adv. in Non-Destr. Test. (Gordon and Breach Science) 5: 161–173

    Google Scholar 

  • Mukhopadhyay C K, Kasiviswanathan K V, Jayakumar T, Baldev Raj 1994 Acoustic emission from aging-induced martensite formation in cold worked AISI type 304 stainless steel.Scr. Metall. 30: 303–307

    Article  Google Scholar 

  • Muller W, Schmitz V, Schafer G 1986 Reconstruction by the synthetic aperture focusing technique.Nucl. Eng. Des. 94: 393–397

    Article  Google Scholar 

  • Palanichamy P, Joseph A, Bhattacharya D K, Baldev Raj 1992a Non-destructive evaluation of residual stresses in austenitic stainless steel butt weld joints by ultrasonic technique.Proc. of National Welding Seminar

  • Palanichamy P, Joseph A, Jayakumar T, Bhattacharya D K, Baldev Raj 1992b Residual stresses and their evaluation in welds.Welding engineering handbook (Trichy: Welding Research Institute) 1: 269–296

    Google Scholar 

  • Palanichamy P, Joseph A, Rai S Bhattacharya D K, Kasiviswanathan K V, Jayakumar T 1993 Non-destructive measurement of residual stresses in carbon steel weld joints.Proc. of National Welding Seminar 39(a)–39(d)

  • Pelseneer J P, Louis G 1974 Ultrasonic testing of austenitic steel castings and welds.Br. J. Non-Destr. Test. 16: 107–113

    Google Scholar 

  • Peugeot R S 1982 Theoretical and practical considerations of microfocus radiography.Mater. Eval. 40: 150–152

    Google Scholar 

  • Rai S, Babu Rao C, Bhattacharya D K, Baldev Raj 1993 Residual stress measurement of explosively welded Al-SS plates using X-ray diffraction techniqueProc. of National seminar NDE-93, Madras.

  • Rai S, Babu Rao C, Bhattacharya D K, Baldev Raj 1994 Evaluation of residual stresses in AISI 304L stainless steel dished ends.J. Non-Destr. Eval. (in press)

  • Rajagopalan C, Kalyanasundaram P, Baldev Raj 1992 An expert system for ultrasonic testing of austenitic stainless steel weldsProc. of National Seminar NDE-92 (eds) C R L Murthy, Baldev Raj, O Prabhakar, A Sreenivasulu (Bangalore: Interline) 1: 155–168

    Google Scholar 

  • Rao B P C, Babu Rao C, Baldev Raj 1993a Modelling of remote field eddy current test phenomenon.J. Non-Destr. Eval. (in press)

  • Rao B P C, Jayakumar T, Bhattacharya D K, Baldev Raj 1993b New methodology for precise ultrasonic velocity measurements and its applications.J. Pure Appl. Ultrasonics 15: 13–19

    Google Scholar 

  • Rao B P C, Shyamsunder M T, Babu Rao C, Baldev Raj 1993c Eddy current impedance imaging of surface defects.Proc. 7th Asia-Pacific Conf. on Non-Destr. Test. Shanghai, China pp. 687–693

  • Rao B P C, Shyamsunder M T, Babu Rao, Bhattacharya D K, Baldev Raj 1992 Computers in eddy current testing.J. Non-Destr. Eval. 12: 13–18

    Google Scholar 

  • Rao B P C, Shyamsunder M T, Bhattacharya D K, Baldev Raj 1989 Multifrequency eddy current inspection of heat exchanger assemblies.Proc. of Seminar on Research in Materials & Management of Corrosion in Industries, Baroda

  • Rao B P C, Shyamsunder M T, Bhattacharya D K, Baldev Raj 1990 Optimisation of eddy current probe for detection of garter springs in PHWRs.Nucl. Technol. 90: 389–393

    Google Scholar 

  • Rao B P C, Shyamsunder M T, Kalyanasundaram P, Bhattacharya D K, Baldev Raj 1991 Development of eddy current test techniques for condition monitoring of pressure tube/calandria tube assemblies of Indian Pressurised Heavy Water Reactors.Br. J. Non-Destr. Test. 33: 437–440

    Google Scholar 

  • Shyamsunder M T, Rao B P C 1992 Recent advances in eddy current testingProc. of National Seminar NDE-92 (eds) C R L Murthy, Baldev Raj, O Prabhakar, A Sreenivasulu (Bangalore: Interline) 1: 141–154

    Google Scholar 

  • Shyamsunder M T, Rao B P C, Babu Rao C, Bhattacharya D K, Baldev Raj 1993 Partial saturation eddy current inspection of ferromagnetic steam generator tubesProc. of National Seminar NDE-93 Madras

  • Shyamsunder M T, Rao B P C, Babu Rao C, Bhattacharya D K, Baldev Raj, 1994 A new tandem probe design for phased-array eddy current testing.Insight 36: 434–436

    Google Scholar 

  • Silk M G 1984 The use of diffraction-based time of flight measurements to locate and size defects.Br. J. Non-Destr. Test. 26: 208–215

    Google Scholar 

  • Silk M G, Whapham A G 1989 Living with defects.Br. J. Non-Destr. Test. 31: 307–313

    Google Scholar 

  • Subramanian C V, Thavasimuthu, Rajagopalan C, Kalyanasundaram P, Bhattacharya D K, Baldev Raj 1991 Development of ultrasonic evaluation methodology for Zircaloy end cap weld joints in thin walled fuel elements for pressurised heavy water reactor.Proc. of National Welding Seminar, Madras 1: 304–311

    Google Scholar 

  • Szilard J 1982Ultrasonic testing (New York: Wiley-Interscience)

    Google Scholar 

  • Temple J A G 1987 Time of flight diffraction technique.Int. J. Pressure Vessels Piping 27: 191–208

    Article  Google Scholar 

  • Topp D A 1994 Reliable inspection of offshore structures by ACFM technique.Insight 36: 422–425

    Google Scholar 

  • University Communique 1987Br. J. Non-Destr. Test. 29: 28–36

    Google Scholar 

  • Venkatraman B, Kanmani S, Babu Rao C, Bhattacharya D K, Baldev Raj 1992 In-service inspection of electrical components in atomic power stations by infrared thermographic imaging.Proc. of National Seminar NDE-92 (eds) C R L Murthy, Baldev Raj, O Prabhakar, A Sreenivasulu (Bangalore: Interline) 1: 102–109

    Google Scholar 

  • Venkatraman B, Kanmani S, Babu Rao C, Bhattacharya D K, Baldev Raj 1993a On-line monitoring of welds by infrared imaging.Proc. 7th Asia-Pacific Conf. on Non-Destr. Test Shanghai, China, pp. 909–916

  • Venkatraman B, Rajagopal C, Baldev Raj 1993b An expert system to aid radiographic testing.J. Non-Destr. Eval. (in press)

  • Venkatraman B, Sethi V K, Bhattacharya D K 1993c High definition radiography of evaporator welds of steam generator of prototype fast breeder reactor.Proc. of National Welding Seminar 1: 26(a)-26(c)/231–237

    Google Scholar 

  • Vontz T, Geobbels K, Maisl M, Reiter H, Hireskorn S 1988 Computer aided tomography.Rev. of Progress in Qualitative Non-Destr. Test. (eds) D O Thompson, D E Chimenti (New York: Plenum) 7A: 389–397

    Google Scholar 

  • Zheng W, Zhu M 1993 A new NDT technique for location of small flaws in small holes.Proc. 7th Asia-Pacific Conf. on Non-Destr. Test. Shanghai, China, pp. 708–713

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Raj, B., Jayakumar, T. & Rao, B.P.C. Non-destructive testing and evaluation for structural integrity. Sadhana 20, 5–38 (1995). https://doi.org/10.1007/BF02747282

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02747282

Keywords

Navigation