References
S. S. Hecker:Sheet Metal Forming and Formability, Proc. 7th Biennial Cong. Int. Deed Draw. Res. Group Amsterdam, October 9–13, 1972, pp. 5.1–5.8.
R. L. Whitely:Trans. ASM, 1960, vol. 52, pp. 154–69.
I. L. Dillamore:J. Phys. D: Appl. Phys., 1974, vol. 7, pp. 979–91.
R. Hill:Proc. Roy. Soc. (London) Series A, 1948, pp. 281–97.
W. A. Backofen, W. F. Hosford, and J. J. Burke:Tram. ASM, 1962, vol. 55, pp. 264–67.
R. Pearce:Int. J. Mech. Sci., 1968, vol. 10, pp. 995–1005.
J. Woodthorpe and R. Pearce:Int. J. Mech. Sci., 1970, vol. 12, pp. 341–47.
P. B. Mellor and A. Parmar: Unpublished Research, University of Bradford, UK, (Presented at the General Motors Research Laboratories Symposium), 1977.
K. Yoshida, K. Yoshii, H. Komorida, M. Usuda, and H. Watanabe:Inst. Phy. Chem. Res., 1970, vol. 64, pp. 24–37.
J. L. Bassani:Int. J. Mech. Sci., 1977, vol. 19, pp. 651–60.
C. F. Shih and D. Lee:J. Eng. Mater. Technol., in press.
D. Lee and F. Zaverl:J. Eng. Mater. Technol., in press.
D. Lee:Met. Trans. A, 1978, vol. 9A, p. 1477
D. Lee and F. Zaverl:Acta Met., in press.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lee, D. A continuum description of anomalous yielding in anisotropic metals. Metall Trans A 9, 1495–1497 (1978). https://doi.org/10.1007/BF02661827
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02661827