Abbreviations
- Cap:
-
Capacity [m3]
- Ct:
-
Cycle time [s]
- d:
-
Granularity [mm]
- f:
-
Absolute error [%]
- f/p:
-
Relative error [%]
- G:
-
Weight of sample [N]
- ΔG:
-
Weight range of sample [N]
- Ith :
-
Theoretical mixer throughput [t/h]
- n:
-
Number of individual samples; number of cycles [-];[1/h]
- nT :
-
Particle number [-]
- p:
-
Confidence interval; probability of the binomial distribution [%]
- P:
-
Statistical certainty [%]
- Qth :
-
Theoretical mixer throughput [m3/h]
- s:
-
Standard deviation [-]
- s2 :
-
Empirical variance [-]
- t:
-
Correction factor; mixing time [-];[s]
- TC:
-
Test concrete [-]
- v:
-
Coefficient of variation [%]
- Vn :
-
Nominal content [m3]
- w/c:
-
Water-cement-ratio [-]
- w/f:
-
Water-fines-ratio [-]
- xj :
-
Individual sample [-]
- x:
-
Arithmetical mean value [-]
- μ:
-
Mathematical expectation [%]
- σ2 :
-
Variance [-]
References
Pohle, G. and Frenking, H., ‘Criteria for the Evaluation of the Mixture’s Uniformity’ (only available in German), Research Report (Federal Ministry of Transport, 1978).
Hummel, A., ‘The Concrete ABC’ (only available in German), 12th Edn. (Berlin, 1959),
Losinger, R., ‘Measurement of the wet concrete’s workability (only available in German), PhD Thesis (Rösch, Vogt & Co., bern, 1956).
Papadakis, M., ‘Relevance of fine basic materials in rheology of wet concrete’, 4th International Congress of the Precast Concrete Block Industry, Paris, Apr. (1963).
Forschungsgesellschaft für das Straßenwesen, ‘Quality Guidelines for Concrete Mixers’ (only available in German), (Cologne, 1968).
Beitzel, H., ‘Random sample analysis for the assessment of concrete mixers’,Betonwerk+Fertigteil-Technik—BFT (10) (1982) 606–614.
Dartsch, B., ‘Influence of the maximum grain size on the concrete’s composition and compression strength’ (only available in German),Betontechnischer Bericht (Beton-Verlag, Düsseldorf, 1971) 139–149.
Härig, S., ‘Gap grading with varying maximum grain size’ (only available in German),Beton (10) (1977) 387–390.
Beitzel, H., ‘Regularities for the Optimization of Concrete Mixers’ (only available in German), (University of Karlsruhe, 1981).
Beitzel, H., ‘The influence of mixing time on concrete quality’,Betonwerk+Fertigteil-Technik-BFT (3) (1988).
Charonnat, Y., ‘Quality control in concrete mixing’, Int. RILEM Conf. on Production Methods and Workability of Concrete, Glasgow, Jun. (1996).
Beitzel, H., ‘Concrete production plants and mixers—Some aspects of their design and operation’,Baumaschinentechnik—BMT (1982).
Blaut, H., ‘Statistical procedures for the quality control of concrete’ (only available in German), (Bauverlag, 1968).
Sommer, K., ‘Sample drawing of Powder and Granular Mass Goods’ (only available in German), (Springer-Verlag, Berlin, 1979).
Alex, W., ‘Principles and systematics of counting procedures in the particle size analysis’ (only available in German),Aufbereitungstechnik (1972) 105–111.
Nägele, E. and Hilsdorf, H.K., ‘Wet concrete analysis at construction sites’,Beton (4) (1980) (Beton-Verlag, Düsseldorf, 1980) 133.
Kühn, G. and Beitzel, H., ‘Influence of the mixing time on the concrete quality’ (only available in German),Forschung Straßenbau und Straßenverkehrstechnik (274) (1979) (BMV, Bonn, 1979).
Forschungsgesellschaft für das Stra\enwesen, ‘Bulletin for the Design of Roadway Pavings with Heat-Insulating Bearing Courses—Part 1’ (only available in German), Edn. 1974 (Cologne, 1974).
Forschungsgesellschaft für das Straßenwesen, ‘Bulletin for the Statistical Evaluation of Test Results—Part 2’ (only available in German), Edn. 1978 (Cologne, 1978).
Forschungsgesellschaft für das Straßenwesen, ‘Bulletin for the Statistical Evaluation of Test Results—Part 3’ (only available in German), Edn. 1979 (Cologne, 1979).
Forschungsgesellschaft für Straßen- und Verkehrswesen, ‘Bulletin for the Statistical Evaluation of Test Results—Part 4’ (only available in German), Edn. 1982 (Cologne, 1982).
Weber, R., Schwara, H. and Soller, R., ‘Good Concrete’ (only available in German), 15th Edn. (Beton-Verlag, Düsseldorf, 1984).
Baroux, R., Charonnat, Y. et Rouselin, P.J., ‘Application des traceurs pour l’étude du malaxage des matériaux de construction’,Bull. liaison Labo P. et Ch. 140 (Réf. 3028) (nov.–déc. 1985).
Gourdon, J.-L., Charonnat, Y. et Robin, P., ‘Évaluation par échantillonnage des procédés de mélange des grains’,Bull. liaison Labo P. et Ch. 153 (Réf. 3261) (janv.–févr. 1988).
Beitzel, H., ‘Influence coefficients—Mixing’,Baumaschinentechnik—BMT (3) (1988).
Bartos, P., ‘Mixing of special concrete’, RILEM TC 150 (1989).
Beitzel, H., ‘Production et équipements en RFA’,Baumaschinentechnik—BMT (4) (1990).
DIN Deutsches Institut für Normung, ‘DIN 459-1/2—Mixers for Concrete and Mortar’ (only available in German), (Beuth Verlag, Berlin, 1995).
Bartos, P.J.M., Marrs, D.L. and Cleland, D.J., ‘Production methods and workability of concrete’, Proceedings of the International RILEM Conference, Paisley, Jun. 1996 (E & FN Spon, London, 1996).
DIN Deutsches Institut für Normung, ‘DIN 1045-1/2—Load-Bearing Structures of Concrete, Reinforced Concrete and Prestressed Concrete’ (only available in German), (Beuth Verlag, Berlin, 2001).
Author information
Authors and Affiliations
Additional information
TC MEMBERSHIP:Chairman: Harald Beitzel, Germany;Secretary: Yves Charonnat, France;Members: Peter Bartos, Great Britain; Claude Legrand, France, Örjan Peterson, Sweden, Joseph Sikuler, Israel; Toni Steiner, Switzerland.
Rights and permissions
About this article
Cite this article
Beitzel, H., Charonnat, Y. & Beitzel, M. Assessment and classification of performance mixers. Mat. Struct. 36, 250–264 (2003). https://doi.org/10.1007/BF02479619
Issue Date:
DOI: https://doi.org/10.1007/BF02479619