Abstract
The development of a welding system which makes it possible to obtain a close joining of two very different materials is described: high density (low porosity) alumina and aluminium alloy. To determine the characteristics of the contact area, optical microscopy was used, whereas energy dispersive spectroscopic (EDX) microanalysis was employed in the study of the atom diffusion that may take place through the metal-ceramics interface. The Hopkinson bar was used to test the joint resistance in an impact test.
Similar content being viewed by others
References
J. M. Sistiaga andJ. M. Salvador,Rev. Soldadura. 18 (1988) 84.
K. Suganuma, Y. Miyamoto andM. Koizumi,Ann. Rev. Mater. Sci. 18 (1988) 47.
K. Suganuma, T. Okamoto, Y. Miyamoto, M. Shimada andM. Kiozumi,Mat. Sci. Tech. 2 (1986) 1156.
J. T. Klomp,Amer. Ceram. Soc. Bull. 49 (1970) 204.
M. G. Nicholas andR. M. Crispin,J. Mater. Sci. 17 (1982) 3347.
F. Hatekeyama, K. Suganuma andT. Okamoto,J. Mater. Sci. 21 (1986) 2455.
K. Suganuma, T. Okamoto, M. Shimada andM. Koizumi,J. Nucl. Mater. 773 (1985) 133.
J. Godziemba-Maliszewski andR. Lison, in “Proceedings of the Second International Symposium on Ceramic Materials and Components for Engineers”, edited by The Deutsche Keramioche Gesellschaft (Lübeck, Germany, 1986).
T. Yamada, H. Sekiguchi, H. Okamoto, S. Azuma andA. Kitamura, in “Proceedings of the Second International Symposium on Ceramic Materials and Components for Engineers”, edited by The Deutsche Keramische Gesellschaft (Lübeck, Germany, 1986), p. 44.
K. Suganuma, T. Okamoto, M. Koizumi andM. Shimada,J. Mater. Sci. Lett. 5 (1985) 1099.
N. F. Kazakov, V. G. Novikov, A. I. Ekimov andV. E. Kravchenko,Avt. Svarka 8 (1982) 24.
M. Courbiere, D. Treheux, C. Beraud, C. Esnouf, G. Thollet andG. Fantozzi,J. Phys. Colloq. C1.47 (1986) 187.
H. Heidt andG. Heimke,Ber. Dr. Keram. Ges. 50 (1973) 303.
C. A. Callow andP. D. Bayer,J. Mater. Sci. 6 (1971) 150.
C. A. Callow andP. D. Bayer,J. Mater. Sci. 6 (1971) 156.
G. V. Alm,Mater. Eng. 70 (1969) 24.
K. Suganuma, T. Okamoto, M. Koizumi andM. Shimada,Ceram. Bull. 65 (1986) 1060.
J. T. Klomp,Ceram. Bull. 51 (1972) 683.
R. V. Allen andW. E. Bordidge,Sci. Ceram. 12 (1984) 383.
M. Morita, K. Suganuma andT. Okamoto,J. Mater. Sci. Lett. 6 (1987) 474.
T. W. Eagar,Weld. J. 66 (1987) 35.
E. S. Karakozov, A. M. Ravich, B. Kharlamov andV. Shirov,Weld. Prod. 29 (1982) 8.
N. F. Kazakov, V. A. Bachin andN. A. Trifonova,Automat. Weld. 36 (1983) 52.
N. F. Kazakov, V. G. Novikov, A. Ehimov andV. Kravchenko,Automat. Weld. 34 (1982) 18.
Y. Arata andA. Ohmori,Trans. JWRI. 13 (1984) 41.
K. Suganuma, T. Okamoto, M. Koizumi andK. Kamachi,J. Mater. Sci. 22 (1987) 3561.
K. Suganuma, T. Okamoto, M. Koizumi andM. Shimada,J. Mater. Sci. Lett. 4 (1985) 648.
Brazing of aluminium alloys, Metals Handbook 9th Edn, Vol. 6 (ASM, 1983) 1022.
J. T. Klomp,Welding Research Supplement 2 (1971) 88.
R. G. Neuhauser,Vacuum 29 (1979) 231.
B. Derby andEr. Wallach,Metal Sci. 16 (1982) 49.
A. Ureña, PhD thesis, UCM, Madrid, (1987).
P. S. Follansbee, Handbook of Metals 8th Edn, Vol. 8, (ASM) 198.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Martínez, M.A., Rodríguez, J., Navarro, C. et al. Welding of dense alumina and aluminium by plastic deformation and diffusion. J Mater Sci 27, 4230–4236 (1992). https://doi.org/10.1007/BF01105132
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01105132