Abstract
In Auger electron spectroscopy of temper-embrittled specimens, Auger signals emanating from fractured grain boundaries vary from grain to grain, and the anisotropy in grain-boundary segregation due to the varying grain-boundary structure is primarily responsible for it. Here, another anisotropy, due to the varying angle between the grain boundaries and the incident electron beam, is considered by extending the geometrical model of Matsudaira and Onchi to the cylindrical mirror analyser geometry. Results suggest that the angular effect may explain a substantial amount of the spread in measured Auger peak height ratios.
Similar content being viewed by others
References
B. D. Powell andD. P. Woodruff,Phil. Mag. 34 (1976) 169.
T. Watanbe,J. de Physique, Colloque 4 (1985) C4–555.
T. Matsudaira andM. Onchi,Surf. Sci. 72 (1978) 7118.
S. J. White, D. P. Woodruff andL. McDonell,ibid. 72 (1978) 77.
K. Horn, A. M. Bradshaw andW. Jacobi,ibid. 72 (1978) 719.
R. Hertlein, R. Weissmann andK. Muller,ibid. 77 (1978) 118.
L. A. Harris,ibid. 15 (1969) 77.
Jin Yu andC. J. McMahon Jr. Met. Trans. 11 (1980) 291.
M. P. Seah. in “Practical Surface Analysis”, edited by D. Briggs and M. P. Seah (Wiley, 1983) p. 247.
H. Erhart andH. J. Garbke.Met. Sci. 15 (1981) 401.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yu, J. A geometrical model on the angular effect in Auger electron spectroscopy. J Mater Sci 25, 1463–1467 (1990). https://doi.org/10.1007/BF00585466
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00585466