Abstract
In this paper the viscoelastic behavior of asphalt mixture was investigated by employing a three-dimensional discrete element method. Combined with Burger’s model, three contact models were used for the construction of constitutive asphalt mixture model with viscoelastic properties in the commercial software PFC 3D, including the slip model, linear stiffness-contact model, and contact bond model. A macro-scale Burger’s model was first established and the input parameters of Burger’s contact model were calibrated by adjusting them so that the model fitted the experimental data for the complex modulus. Three different approaches have been used and compared for calibrating the Burger’s contact model. Values of the dynamic modulus and phase angle of asphalt mixtures were predicted by conducting DE simulation under dynamic strain control loading. The excellent agreement between the predicted and the laboratory test values for the complex modulus shows that DEM can be used to reliably predict the viscoelastic properties of asphalt mixtures.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Adhikari S. and You Z. (2010) 3D discrete element models of the hollow cylindrical asphalt concrete specimens subject to the internal pressure, International Journal of Pavement Engineering. 11:5, 429-439.
Cai W., McDowell G.R. and Airey G.D. (2014) Discrete element visco-elastic modelling of a realistic graded asphalt mixture. Soil and Foundations, 54(1):12-22.
Darestani, M. Y., P. T. David, N. Andreas, and B. Daksh (2006) “Dynamic Response of Concrete Pavements under Vehicular Loads”, Proc., IABSE Symposium—Response to Tomorrow’s Challenges in Structural Engineering, Budapest, Hungary, pp. 104–105.
Dondi G., Vignali V., Pettinari M., Mazzotta F., Simone A. and Sangiorgi C. (2014). Modeling the DSR complex shear modulus of asphalt binder using 3D discrete element approach. Construction and Building Materials 54:236–246.
Feng H., Pettinari M., Hofko B. and Stang H. (2015) Study of the Internal Mechanical response of an asphalt mixture by 3-D Discrete Element Modeling. Construction and Building materials.
Gillespie, T. D., S. M. Karimihas, D. Cebon, M. W. Sayers, M. A. Nasim, W. Hansen, and N. Ehsan (1993) NCHRP Report 353: Effects of Heavy- Vehicle Characteristics on Pavement Response and Performance. TRB, National Research Council, Washington, D.C.
Itasca Consulting Group (2008), Inc. PFC3D Ver. 4.0, Minneapolis.
Jun C., Tongyan P., and Xiaoming H. (2011). Discrete Element Modeling of Asphalt Concrete Cracking Using a User-defined Three-dimensional Micromechanical Approach. Journal of Wuhan University of Technology-Mater. Sci. Ed. Vol. 26 No. 6.
Jun C., and Tongyan P .et al. (2012) Predicting the Dynamic Behavior of Asphalt Concrete Using 3D DEM. Journal of Wuhan University of Technology-Mater. Sci. Ed. Vol.27 No. 2.
Kim RY. (2009) Modeling of Asphalt Concrete. ASCE Press
Liu Y., Dai Q. and You Z. (2009) Viscoelastic Model for Discrete Element Simulation of Asphalt Mixtures. Journal of Engineering Mechanics. Vol. 135, No. 4.
Liu Y., and You Z. (2008), Simulation of Cyclic Loading Tests for Asphalt Mixtures using User Defined Models within Discrete Element Method, GeoCongress 2008.
Liu Y., and You Z. (2011) Accelerated Discrete-Element Modeling of Asphalt-Based Material with Frequency-Temperature superposition principle. Journal of Engineering Mechanics,. Vol. 137, No. 5.
Nillson, R.N., Hopman, P.C., and Isacsson, U. (2002) Influence of different rheological models on predicted pavement responses in flexible pavements. Road Materials and Pavement Design: An International Journal, 3, 117–149.
Uddin, W. (2003) “Effects of FWD Load-Time History on Dynamic Response Analysis of Asphalt Pavement”, Presented at Pavement Performance Data Analysis Forum in Conjunction with MAIREPAV03, Guimaraes, Portugal.
Yu H., and Shen S. (2013) A micromechanical based three-dimensional DEM approach to characterize the complex modulus of asphalt mixtures. Construction and Building Materials 38 1089–1096.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 RILEM
About this paper
Cite this paper
Feng, H., Pettinari, M., Stang, H. (2016). Three Different Ways of Calibrating Burger’s Contact Model for Viscoelastic Model of Asphalt Mixtures by Discrete Element Method. In: Canestrari, F., Partl, M. (eds) 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials. RILEM Bookseries, vol 11. Springer, Dordrecht. https://doi.org/10.1007/978-94-017-7342-3_34
Download citation
DOI: https://doi.org/10.1007/978-94-017-7342-3_34
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-017-7341-6
Online ISBN: 978-94-017-7342-3
eBook Packages: EngineeringEngineering (R0)