Abstract
Reduction of hot asphalt mixtures for the usage and development of sustainable supplementary Cold Asphalt Mixtures (CAM) for the construction of road and highway surface layers is a hot subject for researchers around the world. This will cover many advantages in terms of: environment impact, cost effectiveness and energy saving.
The aim of this study is to enhance the properties of a gap graded Cold Rolled Asphalt (CRA) containing cement as filler by addition of a by-product material as an activator. Ordinary Portland cement was added to the cold rolled asphalt as a replacement for the conventional mineral filler (0–100 %), while a by-product material represents Liverpool John Moores University Additive (LJMUA) was added to the whole mix in the range from 0 to 3 % by total mass of aggregate. Laboratory tests included stiffness modulus and uniaxial creep test as indicators to the mechanical properties.
The study concluded that there is a considerable improvement in the mechanical properties from the addition of LJMUA to the CRA containing cement especially for the early life stiffness modulus that is the main disadvantage of the cold mixtures.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Nichollas, J. C. (2004) Asphalt Surfacings. Taylor and Francis e-Library.
Thanaya, I. N. A. (2003). Improving the Performance of Cold Bituminous Emulsion Mixtures (CBEMs) Incorporating waste Materials. UK: University of Leeds.
Leech, D. (1994). Cold Bituminous Materials for Use in the Structural layers of Roads, in Traspotation Research laboratory, Project Report 75, Uk.
Head, R. W. (1974). An informal report of cold mix research using emulsified asphalt as a binder. In Association of Asphalt Paving Technologists Proceeding (AAPT).
Li, G., Zhao, Y., Pang, S., & Huang, W. (1998). Experimental study of Cement-Asphalt Emulsion Composite. Cement Concrete Research, 28(5).
Wang, Z. S., & Sha, A. (2010). Micro hardness of interface between cement asphalt emulsion mastics and aggregates. Journal of Materials and Structures, 43, 453–461.
British, Standard Institution (1997). BS EN 933-Part 1: Determination of partical size distribution-sieving method-Test for Geometrical Properties of Aggregate. London, UK.
British, Standard Institution (2006). BS EN 13108: Part 4. Bituminous Mixtures Materials specification-Hot Rolled Asphalt. London, UK.
Asphalt Institute. (1989). Asphalt Cold Mix Manual, manual series No.14 (MS-14), Maryland, USA.
British, Standard Institution (2010). BS 594987: Asphalt for Roads and Other Paved Areas-Spacefication for Transport, Laying, Compaction and Type Testing Protocols. London, UK.
Jerkins, K. (2000). Mix design consedration s for cold and half-warm bitumious mixes with emphasis on foamed asphalt. University of Stellenbosch.
British, Standard Institution (2004). BS EN 12697: Part 26. Bitumenous Mixtures-Test Methods for Hot Mix Asphalt- Stiffness. London, UK.
British, Standard Institution (2005). Bituminous mixtures Test methods for hot mix asphalt -Part 25: Cyclic compression test. London, UK.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
Al-Hdabi, A., Al Nageim, H., Ruddock, F., Seton, L. (2014). Improving the Mechanical Properties of Cold Rolled Asphalt Containing Cement Utilising by Product Material. In: Llinares-Millán, C., et al. Construction and Building Research. Springer, Dordrecht. https://doi.org/10.1007/978-94-007-7790-3_59
Download citation
DOI: https://doi.org/10.1007/978-94-007-7790-3_59
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-007-7789-7
Online ISBN: 978-94-007-7790-3
eBook Packages: EngineeringEngineering (R0)