Abstract
Aiming at improving the performance and reducing cost of real-time-Ethernet-based control system, a new multiprocessors reconfigurable embedded platform is proposed in this paper. The asymmetric dual NIOS II processors are adopted in this platform. The application software is executed in one processor, and the real-time Ethernet protocol runs on the other processor. The μC/OS-II operating system runs on both of the processors as RTOS. A novel technique for inter-processors’ communication is proposed as well. The implementation of the system is described, and the comparison between the proposed platform and the traditional platform is made in this paper.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Felser M (2005) Real-Time ethernet —industry prospective. Proc IEEE 93(6):1118–1129
IEC: Real Time Ethernet Control Automation Technology (ETHERCAT), proposal for a publicly available specification for real-time ethernet, document IEC, 65C/355/NP. Date of circulation: 19 Nov 2004
IEC: Real time ethernet SERCOS III, proposal for a publicly available specification for real-time ethernet, document IEC, 65C/358/NP. Date of circulation: 03 Dec 2004
IEC: Real-time ethernet PROFINET IO, Proposal for a publicly available specification for real-time ethernet, document IEC, 65C/359/NP, Date of circulation: 03 Dec 2004
Yu CY Design and implementation of a network offload engine. Institute of computer and communication. National Cheng Kung University, Tainan, Taiwan
Blake G, Dreslinski RG, Mudge T (2009) A survey of multicore processors. IEEE Sig Process Mag 26(6):26–37
ALTERA Corp (2011) Embedded Peripherals IP User Guide. Altera, p 261
ALTERA Corp (2014) Alternative Nios II Boot Methods. Altera, pp 6–10
Acknowledgement
This work is supported by the China National Science and Technology Support Program under Grant (No. 2015BAG14B00).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Jiang, G., Tang, J., Zhou, X., Ren, M. (2016). Application of Multiprocessors Reconfigurable Embedded Platform in Real-Time-Ethernet-Based Control System. In: Jia, L., Liu, Z., Qin, Y., Ding, R., Diao, L. (eds) Proceedings of the 2015 International Conference on Electrical and Information Technologies for Rail Transportation. Lecture Notes in Electrical Engineering, vol 377. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-49367-0_83
Download citation
DOI: https://doi.org/10.1007/978-3-662-49367-0_83
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-49365-6
Online ISBN: 978-3-662-49367-0
eBook Packages: EnergyEnergy (R0)