Abstract
A new kind of pneumatic motor with offset swingiang planetary drive of bevel gears and the application in Capstan is presented; the researched of the calculation of the efficiency of the mechanism is made. Compared to the former structure, new kind of structure has many advantages over that of the old structure. The pneumatic driving system in the traditional derrick car is: pneumatic motor drives a reducer, and then the reducer in turn drives a capstan. Another pneumatic driving system is: an axial piston motor and an internal cycloid pinwheel drive are applied, so that the reducer and the capstan are combined into one so that simplified the transmission system. In the third version, a pneumatic motor is applied, which can be considered as the combination of pneumatic motor with axial piston and the planetary reducer and then drives the capstan, so that simplified the transmission system as well. The new kind of pneumatic motor with offset swing planetary drive of bevel gears, which combined the pneumatic motor, the internal planetary reducer with bevel gears, and the capstan together, is the most compact structure. It is of more advantage in the occasion when space is extremely limited. In the paper, a new kind of construction of this mechanism is presented. The computer-aided assembly of pneumatic motor with offset swinging planetary drive of bevel gear is presented in this paper.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
New technique in Pneumatic field. American Pneumatic and Pneumatic Drive (January 1972)
Pneumatic motor with swinging bevel gear transmission. American Product Engineering (January 1972)
USA Patent No.3675539
Huran, L., Dragomir, D.: Calculul randa mentului motor hidtanlic cu angrenaj conjc precesional (January 1996) < <MMTC> > (in Romania)
Huran, L.: Pneumatic motor with swinging bevel gear transmission. Drive System Technique (February 1998)
Huran, L., Dragomir, D.: Precontrolul angrenarii punctuale cu abateri la angrenaje spirale conice. Tehnologll Calitate Masini Materiale (January 1996) (in Romania)
Huran, L.: Contact deformation and pre-control of transmission properties of point conjugate gear. Drive System Technique (March 1999)
Huran, L.: Internal cylindrical-bevel gear transmission Drive System Technique (February 1999)
Huran, L.: The conjugation of a new kind of transmission. Drive System Technique (January 1999)
Huran, L.: The deduction of the forms of the planetary transmission of bevel gear. Drive System Technique (March 1998)
Huran, L.: The inversion of the Planetary Drive of Bevel Gear. In: ICMT 2006, ISTP (2006)
Lambeck, R.P.: Pneumatic Pumps and Motors: Selection ang Application for Pneumatic Power control System. Marcel Dekker Inc., New York (1983)
Vehicle Pneumatic System and Digital/Electropneumatic Controls, SAE SP-882 (1991) ISBN 1-56091-174-3
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Liu, H. (2011). The Computer-Aided Assembly of Pneumatic Motor with Offset Swinging Planetary Drives of Bevel Gear. In: Lin, S., Huang, X. (eds) Advanced Research on Computer Education, Simulation and Modeling. CESM 2011. Communications in Computer and Information Science, vol 176. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-21802-6_37
Download citation
DOI: https://doi.org/10.1007/978-3-642-21802-6_37
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-21801-9
Online ISBN: 978-3-642-21802-6
eBook Packages: Computer ScienceComputer Science (R0)