Abstract
In this chapter a review of pultrusion process is presented. The process can be used to produce composites with reinforcements that are either synthetic fibres such as glass and carbon fibres or natural fibres like kenaf, jute, and hemp fibres. Selected previous work such as mechanical properties, processing parameters, and product development of pultruded natural fibre composites is reviewed. Special attention is paid on the development and properties of kenaf fibre composites fabricated from the pultrusion process.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abdalla FH, Saad AM, Khalid YA, Sapuan SM, Hamouda AMS, Sahari BB, Hamdan MM (2007) Design and fabrication of low cost filament winding machine. Mater Des 28:234–239
Affzan MH, Akil HM, Ishak ZAM, Bakar AA, Abd Rahman MA (2011) The effect of natural weathering exposure on the properties of pultruded jute fibre reinforced unsaturated polyester composites. In: Proceedings of the 5th Asia-Europe symposium on processing and properties of reinforced polymers, 29 May–1 June, Dresden
Akil HM, Leong WC, Ishak ZAM, Bakar AA, Abd Rahman MA (2009a) Water absorption study on pultruded jute fibre reinforced unsaturated polyester composites. Compos Sci Technol 69:1942–1948
Akil HM, Bakar AA, Ishak ZAM, Mazuki AAM, Safiee S (2009b) Properties of pultruded jute and kenaf fiber reinforced unsaturated polyester composites. In: NATO workshop “Textile Composites”, 18–21 May, Kiev
Akil HM, Bakar AA, Ishak ZAM, Mazuki AAM, Safiee S (2009c) Study on properties of pultruded jute fibre reinforced unsaturated polyester composites for outdoor application. In: Proceedings of international conference on kenaf & allied fibres 2009 (ICKAF 2009), 1–3 December, Kuala Lumpur
Akil HM, De Rosa IM, Santulli C, Sarasini F (2010a) Flexural behaviour of pultruded jute/glass and kenaf/glass hybrid composites monitored using acoustic emission. Mater Sci Eng A527:2942–2950
Akil HM, Cheng LW, Zamri MH, Bakar AA, Ishak ZAM (2010b) Water absorption study on pultruded jute/glass fibre reinforced unsaturated hybrid composites. In: Proceedings of the 4th World Engineering Congress, 2–5 August, Kuching
Akil HM, Sahnizam S, Ariffin ZAM, Bakar AA, Mazuki MAA (2010c) Study on dynamic mechanical properties of pultruded kenaf fiber reinforced composites. In: Proceedings of the 7th Asian-Australian conference on composite materials, 15–18 November, Taipei
Akil HM, Santulli C, Sarasini F, Tirillò J, Valente T (2014) Environmental effects on the mechanical behaviour of pultruded jute/glass fibre-reinforced polyester hybrid composites. Compos Sci Technol 94:62–70
Angelov I, Wiedmer S, Evstatiev M, Friedrich K, Mennig G (2007) Pultrusion of a flax/polypropylene yarn. Compos A: Appl Sci Manuf 38:1431–1438
Anwar UMK, Paridah MT, Hamdan H, Sapuan SM, Bakar ES (2009) Effect of pressing time on physical and mechanical properties of bamboo strip fibre reinforced phenolic composites. Ind Crop Prod 29:214–219
Baran I, Tutum CC, Hattel JH (2013) The effect of thermal contact resistance on the thermosetting pultrusion process. Compos B Eng 45:995–1000
Chandrashekhara K (2004) Energy efficient and sustainable building enclosures using bio-based materials. In: Proceedings of the NSF-PATH housing research workshop, Orlando, pp 187–191
Davoodi MM, Sapuan SM, Yunus R (2008) Conceptual design of a polymer composite automotive bumper absorber. Mater Des 29:1447–1452
El-Shekeil YA, Sapuan SM, Abdan K, Zainudin ES (2012) Influence of fiber content on the mechanical and thermal properties of kenaf fiber reinforced thermoplastic polyurethane composites. Mater Des 40:299–303
Fairuz AM, Sapuan SM, Zainudin ES, Jaafar CNA (2014a) Polymer composite manufacturing using a pultrusion process: a review. Am J Appl Sci 11:1798–1810
Fairuz AM, Sapuan SM, Zainudin ES, Aiza CN (2014b) Study of pultrusion process parameters. In: Proceedings of the postgraduate symposium on composites science and technology 2014 & 4th postgraduate seminar on natural fibre composites 2014, 28th January, Putrajaya, pp 116–120
Fairuz AM, Sapuan SM, Zainudin ES, Jaafar CAN (2014c) Optimization of pultrusion process for kenaf fibre reinforced vinyl ester composites. In: the 3rd international conference on design and concurrent engineering (iDECON 2014), Melaka, 22–23 September
Hambali A, Sapuan SM, Ismail N, Nukman Y (2009) Application of analytical hierarchy process in the design concept selection of automotive composite bumper beam during the conceptual design stage. Sci Res Essays 4:198–211
Lackey E, Vaughan JG, Inamdar K, Hancock B (2008) Statistical characterization of pultruded composites with natural fiber reinforcements – part A: fabrication. J Nat Fibers 4:73–87
Liang G, Garg A, Chandrashekhara K, Flanigan V, Kapila S (2005) Cure characterization of pultruded soy-based composites. J Reinf Plast Compos 24:1509–1520
Malek FHA, Zainudin ES, Paridah MT, Jawaid M (2014) The effect of additives on bending strength of pultruded hybrid reinforced resol type phenolic composite. Appl Mech Mater 564:418–421
Martin P (2013) Polyurethane pultrusion resin. Reinf Plast 57:13
Mazuki AAM, Safiee S, Akil HM, Bakar AA, Ishak ZAM (2009a) Study of water absorption behavior on pultruded jute fiber reinforced polyester composites using dynamic mechanical analysis. In: Proceedings of the 4th international conference of recent advances in materials, minerals & environment and the 2nd Asia symposium on material and processing, 1–3 June, Batu Ferringhi
Mazuki AAM, Akil HM, Bakar AA, Ishak ZAM, Safiee S (2009b) Effect of water absorption on the dynamic mechanical properties of pultruded jute fibre reinforced polyester composites. In: Proceedings of the international conference on composites or nano engineering. Composites and reinforced plastics (ICCE 17), 26 July–1 August, Honolulu
Mazuki AAM, Akil HM, Safiee S, Ishak ZAM, Bakar AA (2011) Degradation of dynamic mechanical properties of pultruded kenaf fibre reinforced composites after immersion in various solution. Compos B Eng 42:71–76
Memon A, Nakai A (2013) The processing design of jute spun yarn/PLA braided composite by pultrusion molding. Adv Mech Eng 2013:1–8. doi:10.1155/2013/816513
Nasir RM, Ghazali NM (2014) Tribological performance of paddy straw reinforced polypropylene (PSRP) and unidirectional glass-pultruded-kenaf (UGPK) composites. J Tribol 1:1–17
Nguyen-Chung T, Friedrich K, Mennig G (2007) Processability of pultrusion using natural fiber and thermoplastic matrix. Res Lett Mater Sci 2007:1–6. doi:10.1155/2007/37123
Nosbi N, Akil HM, Bakar AA, Ishak ZAM (2009) Influence of water absorption on mechanical properties of pultruded kenaf fiber reinforced polyester composites. In: Proceedings of the 4th international conference of recent advances in materials, minerals & environment and the 2nd Asia symposium on material and processing, 1–3 June, Batu Ferringhi
Nosbi N, Akil HM, Ishak ZAM, Bakar AA (2010) Degradation of compressive properties of pultruded kenaf fiber reinforced composites after immersion in various solutions. Mater Des 31:4960–4964
Nosbi N, Akil HM, Ishak ZAM, Bakar AA (2011) Effect of water absorption on the mechanical properties of pultruded kenaf fibre reinforced polyester composites. Adv Compos Lett 20:21–26
Omar MF, Akil HM, Ahmad ZA, Mazuki AAM, Yokoyama T (2010) Dynamic properties of pultruded natural fibre reinforced composites using split Hopkinson pressure bar technique. Mater Des 31:4209–4218
Peng X, Fan M, Hartley J, Al-Zubaidy M (2012) Properties of natural fiber composites made by pultrusion process. J Compos Mater 46:237–246
Safiee S, Mazuki AAM, Akil HM, Bakar AA, Ishak ZAM (2009a) Influence of water absorption on coefficient of the thermal expansion (CTE) of pultruded jute fiber reinforced polyester composite (PJFRPC). In: Proceedings of the 4th international conference of recent advances in materials, minerals& environment and the 2nd Asia symposium on material and processing, 1–3 June, Batu Ferringhi
Safiee S, Akil HM, Mazuki AAM, Bakar AA, Ishak ZAM (2009b) Transverse and longitudinal measurements of pultruded kenaf fibre reinforced unsaturated polyester and their impact on interfacial residual stresses in composites. In: Proceedings of the international conference on kenaf & allied fibres 2009 (ICKAF 2009), 1–3 December, Kuala Lumpur
Safiee S, Akil HM, Mazuki AAM, Ishak ZAM, Bakar AA (2011) Properties of pultruded jute fiber reinforced unsaturated polyester composites. Adv Compos Mater 20:231–244
Sapuan SM, Abdalla HS (1998) A prototype knowledge-based system for the material selection of polymeric-based composites for automotive components. Compos A Appl Sci Manuf 29A:731–742
Sharma D, Mccarty TA, Roux JA, Vaughan G (1998a) Fluid mechanics analysis of a two-dimensional pultrusion die inlet. Polym Eng Sci 38:1611–1622
Sharma D, Mccarty TA, Vaughan G, Roux JA (1998b) Pultrusion die pressure response to changes in die inlet geometry. Polym Compos 19:180–192
Singh B, Gupta M (2005) Performance of pultruded jute fibre reinforced phenolic composites as building materials for door frame. J Polym Environ 13:127–137
Sundararaman S, Shabeer A, Garg A, Chandrashekhara K (2005) Impact characterization of pultruded soy-based composites. In: Proceedings of the SAMPE conference, 1–5 May, Long Beach, pp 1–10
Van de Velde K, Kiekens P (2001) Thermoplastic pultrusion of natural fibre reinforced composites. Compos Struct 54:355–360
Vuppalapati RR, Menta VGK, Chandrashekhara K (2011) Synthesis and performance evaluation of soy-based aliphatic polyurethane nanocomposites for pultrusion. In: Proceedings of the SAMPE conference, 23–26 May, Long Beach
Vuppalapati RR, Menta VGK, Chandrashekhara K, Schuman T (2014) Manufacturing and impact characterization of soy-based polyurethane pultruded composites. Polym Compos 35:1070–1077
Zamri MH, Akil HM, Shahidan HA, Ishak ZAM, Bakar AA (2011) Pultruded natural fibre reinforced composites: preparation, properties and application. In: Proceedings of the nineteenth annual international conference on composites or nano engineering, 24–30 July, Shanghai
Zamri MH, Akil HM, Bakar AA, Ishak ZAM, Leong WC (2012) Effect of water absorption on pultruded jute/glass fiber-reinforced unsaturated polyester hybrid composites. J Compos Mater 46:51–61
Zamri MH, Akil HM, Ishak ZAM, Bakar AA (2014) Effect of different fiber loadings and sizes on pultruded kenaf fiber reinforced unsaturated polyester composites. Polym Compos. doi:10.1002/pc.23025, (in press)
Zhu J, Castle J, Berring N, Chandrashekhara K, Flanigan KV, Kapila S (2001) Mechanical characterization of soy-based pultruded composites. In: Proceedings of the CFA composites conference, Tampa, paper no. M-203, 3–6 October, pp 1–8
Zhu J, Chandrashekhara K, Flanigan KV, Kapila S (2004) Manufacturing and mechanical properties of soy-based composites using pultrusion. Compos A Appl Sci Manuf 35:95–101
Acknowledgment
The researchers wish to thank Universiti Putra Malaysia for the funding support through the Research University Grant Scheme (RUGS 2–2012), project number: 05-02-12-1916RU.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Fairuz, A.M., Sapuan, S.M., Zainudin, E.S., Jaafar, C.N.A. (2015). Pultrusion Process of Natural Fibre-Reinforced Polymer Composites. In: Salit, M., Jawaid, M., Yusoff, N., Hoque, M. (eds) Manufacturing of Natural Fibre Reinforced Polymer Composites. Springer, Cham. https://doi.org/10.1007/978-3-319-07944-8_11
Download citation
DOI: https://doi.org/10.1007/978-3-319-07944-8_11
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-07943-1
Online ISBN: 978-3-319-07944-8
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)