Abstract
There are given the investigation results of bitumen modified with the polymer latex Butonal NS 104 depending on temperature, time and the modifying agent amount, taking into account the manufacturing company BASF recommendations. The carried research has shown the possibility to produce bituminous polymer on the polymer latex Butonal NS basis that meets the Ukraine technological normative documents requirements. On the conducted investigations basis, there have been established the rational parameters of bituminous polymer binding agent production process thus allowing determining the conditions of the polymer latex Butonal NS 104 application under the domestic production conditions. The study found that bituminous polymer bending agent physical-mechanical properties change in the wide limits (by 50–100%) depending on the polymer amount, and the preparation process parameters show the possibility of active regulation of its properties under the particular operating conditions. It is established that bituminous polymer bending agent properties resistance and stability under the high process temperatures influence show the possibility of its sufficiently long-term storage under the production conditions with the original properties keeping.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kang, Y., Song, M., Pu, L., Liu, T.: Rheological behaviors of epoxy asphalt inder in comparison of ase asphalt inder and SBS modified asphalt inder (Peoлoгiчнa пoвeдiнкa eпoкcиднoгo acфaльтoвoгo в’яжyчoгo y пopiвняннi iз звичaйним acфaльтoвим в’яжyчим тa мoдифiкoвaним acфaльтoвим в’яжyчим SBS). Constr. Build. Mater. Shaanxi 76, 343–350 (2015). https://doi.org/10.1016/j.conbuildmat.2014.12.020
Esfahani, M.A., Jamaloei, M.H., Torkaman, M.F.: Rheological and mechanical properties of bitumen modified with Sasobit, polyethylene, paraffin, and their Mixture. J. Mater. Civil Eng. 31(7), 04019119 (2019). https://doi.org/10.1061/(ASCE)MT.1943-5533.0002664
Yin, H., Zhang, Y., Sun, Y., Xu, W., Yu, D., Xie, D.: Performance of hot mix epoxy asphalt binder and its concrete. Mater. Struct. 48(11), 3825–3835 (2015)
Solouki, A., Muniandy, R., Hassim, S., Kheradmand, B.: Rheological property investigation of various Sasobit-modified bitumen. Pet. Sci. Technol. 33(7), 773–779 (2015). https://doi.org/10.1080/10916466.2015.1010040
Yu, J., Cong, P., Wu, S.: Laboratory investigation of the properties of asphalt modified with epoxy resin (Laboratory determination of asphalt concrete properties modified with epoxy resin). J. Appl. Polym. Sci. 12(6), 3557–3563 (2009). https://doi.org/10.1002/app.30324
Simnofske, D., Mollenhauer, K.: Effect of wax crystallization on complex modulus of modified bitumen after varied temperature conditioning rates. In: IOP Conference Series: Materials Science and Engineering, vol. 236 (2017). https://doi.org/10.1088/1757-899x/236/1/012003
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Onishchenko, A., Lapchenko, A., Fedorenko, O., Bieliatynskyi, A. (2021). Research of the Properties of Bitumen Modified by Polymer Latex. In: Murgul, V., Pukhkal, V. (eds) International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies EMMFT 2019. EMMFT 2019. Advances in Intelligent Systems and Computing, vol 1258. Springer, Cham. https://doi.org/10.1007/978-3-030-57450-5_10
Download citation
DOI: https://doi.org/10.1007/978-3-030-57450-5_10
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-57449-9
Online ISBN: 978-3-030-57450-5
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)