Abstract
We propose a “Hardware-In-the-Loop Simulation” (HILS) and “Rapid Control Prototyping” (RCP) based inter-working scheme for computational evaluation of manipulators and trajectory controller. The objective of the scheme is to minimize the development time in controller design and reduce the efforts in body modeling analysis, especially in the field of robotics. We have derived the analytical model of two manipulators for HILS and implemented an output controller for RCP; then two functional blocks are integrated to verify and validate the usefulness and possibility of HILS and RCP based inter-working (HRI) scheme. Experimental results show that the proposed HRI scheme is an effective means to apply for modeling the two elbow manipulators and implementing the selected controller for the manipulator applications in an early stage of the development cycle. Furthermore, HRI scheme has shown to be particularly beneficial for body dynamics analysis and manipulator control tasks.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Canudas De Wit, B., Siciano, Bastin, G.: Theory of Robot Control. Springer, Heidelberg (1996)
Nicosia, S., Tomei, P.: Robot Control by Using Only Joint Position Measurements. IEEE Transactions on Automatic Control 35, 1058–1061 (1990)
Isidori, A.: Nonlinear Control Systems, 2nd edn. Springer, Berlin (1989)
Slotine, J.-J.E., Li, W.: Applied Nonlinear Control. Prentice-Hall, New Jersey (1991)
Spong, M.W., Vidyasagar, M.: Robot Dynamics and Control. John Wiley and Sons, New York (1989)
Ailon, A., Segev, R.: Stable Observer-Based Trajectory Controller for Asymptotic Model Matching of a Rigid Robot. Journal of Optimization Theory and Applications 87(3), 517–538 (1995)
Bonev, I.A., Yang, Y.M., Ailon, A.: Output Controller for Robot Trajectory Tracking System, Mechatronics Project Report, K-JIST, June 14 (1997)
Hanselmann, H.: Hardware-in-the-Loop Simulation and its Integration into a CACSD Toolset. In: IEEE International Symposium on Computer-Aided Control System Design, Dearborn, Michign, September 15-18 (1999)
Jeon, J.-W., Woo, G.-A., Lee, K.-C., Hwang, D.-H., Kim, Y.-J.: Developments of ABS controller for aircraft with real-time HILS system. In: 6th Electrical Machines and Systems, ICEMS 2003, November 9-11, vol. 2, pp. 498–501 (2003)
Wang, D., Xu, G.: Full-state tracking and internal dynamics of non-holonomic wheeled mobile robots. IEEE Transactions on Mechatronics 8, 203–214 (2003)
Roy, J., Goldberg, R.P., Whitcomb, L.L.: Structural design, analysis, and performance evaluation of a new semi-direct drive robot arm: theory and experiment, Mechatronics. IEEE/ASME Transactions on 9(1), 10–19 (2004)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2005 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Yang, YM., Mahalik, N.P., Byun, SC., Yang, SM., Ahn, BH. (2005). An HILS and RCP Based Inter-working Scheme for Computational Evaluation of Manipulators and Trajectory Controller. In: Khosla, R., Howlett, R.J., Jain, L.C. (eds) Knowledge-Based Intelligent Information and Engineering Systems. KES 2005. Lecture Notes in Computer Science(), vol 3682. Springer, Berlin, Heidelberg. https://doi.org/10.1007/11552451_27
Download citation
DOI: https://doi.org/10.1007/11552451_27
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-28895-4
Online ISBN: 978-3-540-31986-3
eBook Packages: Computer ScienceComputer Science (R0)