Conclusions
Analysis of metal-powder rolling coefficients has made it possible to approach the examination of velocity conditions from a new angle and obtain an analytical expression for determining the velocity of entry of powder consolidated to its tap density into the rolling-mill rolls. Forward slip in powder rolling is characterized both by the densification coefficient and the ratio hs/D. It is shown that, in the rolling of porous strip of constant thickness, varying the density under the rolling of porous strip whose thickness and density are strongly affected by changes in rolling velocity, the latter may exert an indirect influence on forward slip. In the rolling of porous strip whose thickness and density are strongly affected by changes in rolling velocity, the latter may exert an indirect influence on forward slip.
Similar content being viewed by others
Literature cited
G. I. Aksenov, In: Powder Metallurgy [in Russian], NTO Mashprom, Moscow (1954).
V. P. Severdenko and E. B. Lozhechnikov, DAN Belorussk. SSR8, No. 4 (1964).
N. N. Pavlov, Tr. Leningr. Politekhn. Inst., No. 238, Izd-vo “Mashinostroenie,” Moscow-Leningrad (1964).
G. A. Vinogradov and V. P. Katashinskii, Poroshkovaya Met., No. 8 (1965).
V. Z. Zhilkin and L. M. Gaidar', Poroshkovaya Met., No. 10 (1965).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 4 (64), pp. 10–14, April, 1968.
Rights and permissions
About this article
Cite this article
Gaidar', L.M., Zhilkin, V.Z. Forward slip in the rolling of strip from metal powders. Powder Metall Met Ceram 7, 258–261 (1968). https://doi.org/10.1007/BF00775787
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00775787